How do I put the PTO drive belt back on?
Slide the drive belt around the PTO clutch pulley or engine pulley. Guide it around the left and right deck blade spindle pulleys, and around the center pulley. Pull the PTO drive belt idler pulley to the right to relieve the PTO drive belt tension. Slip the PTO drive belt onto the PTO drive belt pulley.
How to put a blade belt back on the pulley?
Slide the drive belt back around the spindle pulleys and the center pulley. Pull the idler pulley to the left and slip the belt around the idler pulley. Seat the drive belt’s angled side into the left and right side spindle pulley grooves with the flat side against the idler pulley. Release the idler pulley to tension the drive belt.
How to put a blade belt back on a MTD?
Pull the idler pulley to the left and slip the belt around the idler pulley. Seat the drive belt’s angled side into the left and right side spindle pulley grooves with the flat side against the idler pulley. Release the idler pulley to tension the drive belt. Pull the PTO idler pulley arm to the right to relieve the PTO drive belt tension.
How do you put the belt back on a riding mower?
Turn off the tractor and disconnect the spark plug wire from the spark plug. Disengage the mower deck blades and set the parking brake. Lower the mowing deck to the lowest position. Remove the retaining screws with a socket wrench and remove the left and right belt guards from the top of the mowing deck.
Slide the drive belt back around the spindle pulleys and the center pulley. Pull the idler pulley to the left and slip the belt around the idler pulley. Seat the drive belt’s angled side into the left and right side spindle pulley grooves with the flat side against the idler pulley. Release the idler pulley to tension the drive belt.
Slide the drive belt around the PTO clutch pulley or engine pulley. Guide it around the left and right deck blade spindle pulleys, and around the center pulley. Pull the PTO drive belt idler pulley to the right to relieve the PTO drive belt tension. Slip the PTO drive belt onto the PTO drive belt pulley.
Turn off the tractor and disconnect the spark plug wire from the spark plug. Disengage the mower deck blades and set the parking brake. Lower the mowing deck to the lowest position. Remove the retaining screws with a socket wrench and remove the left and right belt guards from the top of the mowing deck.
Pull the idler pulley to the left and slip the belt around the idler pulley. Seat the drive belt’s angled side into the left and right side spindle pulley grooves with the flat side against the idler pulley. Release the idler pulley to tension the drive belt. Pull the PTO idler pulley arm to the right to relieve the PTO drive belt tension.