How do I program my Tech 2 radio?

How do I program my Tech 2 radio?

How to do radio relearn with Tech 2 GM 33.002

1. Main Menu: Select “Diagnostics”
2. Vehicle Identification: select.
3. System Selection: Select “Body”
4. Vehicle Identification: select.
5. Body: Select “Navigation Radio”
6. Radio: Select “Special Functions”
7. Special Functions: Select “VIN Relearn”

How does the stereo work on a Saab 9-3?

This means that the stereo system on the 9-3 requires the fibre optic ring to be intact to operate correctly. Apart from the Audio System the top dash SID (Saab info display) requires the stereo to be operational, as do the indicator / warning chimes. Can I change the stereo on 2001 to 2006 models ?

Do you need Tech 2 for Saab 9-3?

The installation did not need to be programmed with Tech 2 device. In the market there are several kit systems for for wiring and installation, and we recommend this to you – CTKSA01 Saab 9-3 2008 Onwards Double Din Car Stereo Fascia Fitting Kit.

Why are the pixels on my Saab 9-3 NOT working?

SAAB 9-3 and 9-5 models all have the very common LCD display failure on the SID and the AC unit, which ends up in missing or fading pixels on the screen. Single pixels or complete lines of pixels have disappeared. Climete contrul unit, SID1 or SID2 displays are difficult or impossible to read.

When did the Saab 9-3 navigation system come out?

This information from the WIS is for model year 2003-2006. Find the 2007-2012 information here: http://saabworld.net/f146/saab-9-3-a…-2012-a-26948/ The Saab Infotainment system has three different control modules depending on the equipment selected for the car.

This means that the stereo system on the 9-3 requires the fibre optic ring to be intact to operate correctly. Apart from the Audio System the top dash SID (Saab info display) requires the stereo to be operational, as do the indicator / warning chimes. Can I change the stereo on 2001 to 2006 models ?

What’s the default volume on a Saab 9-5?

The default setting for START VOL is volume setting 9, and that for TEL VOL is volume setting 14 (the highest volume setting is 30). Press and hold the BAND button at the same time as you switch on the Audio System. After START VOL appears, release the BAND button. Adjust the starting volume using the volume knob.

How does traction control work in a Saab 9-5?

All control modules in the Saab 9-5 are connected to the bus with the exception of ABS and SRS. For cars with Traction Control, the TC/ABS control module is connected to the bus. The bus allows large quantities of data to be sent between the control modules using only two cables.

Where does the speed signal go in a Saab?

Since ABS is not connected to the bus, the vehicle speed signal is sent on a separate lead from ABS to MIU. MIU then sends the data over the buses. In cars with Traction Control, the TC/ABS sends vehicle speed data to the MIU via the P-bus.