How do I get the key out of my Jeep Grand Cherokee?
Wiggle the Steering Wheel Give the wheel a wiggle while lightly trying to turn the key out of the ignition. If the steering lock is causing a bind, this will relieve the pressure and get the key out.
How do you get the ignition key out of a jeep?
Access the solenoid: Lift the rubber mat off the tray and remove the two tray screws. You will see the solenoid. It’s a white cylinder with a metal bar protruding rearward toward the shifter. You might opt to remove the center console too. Quick Fix: If you’re in a jam and need to remove the key without disassembling things read on.
Why is the ignition key stuck in my Grand Cherokee?
Brilliant post, Milo, very useful. I have a 2003 Grand Cherokee Overland 2.7 CRD, which I love, and earlier today the ignition key would not come out of the ignition. My first thought was the ignition lock itself, so I spent some time jiggling the key in the lock without success.
What does it mean when your key is stuck in ignition?
Key Stuck In Ignition Fixed! Per my post, dated 01-05-2012, 09:36 PM. I found and fixed the key and start problems. Back in January I was experiencing a problem where I wasn’t able to turn the key to the natural position where the key can be removed from the ignition. This was due to the binding of parts within the shift mechanism.
How do you remove the ignition key from a Jeep Liberty?
Turn the ignition switch to the run position and depress the tab below the key lock cylinder, while holding the tab pull the key and cylinder out of the column. Now the shift interlock cable can be removed. Reverse the procedure outlined for re-installing the new parts. Also see our repair blog on Jeep Liberty rear power window replacement.
Brilliant post, Milo, very useful. I have a 2003 Grand Cherokee Overland 2.7 CRD, which I love, and earlier today the ignition key would not come out of the ignition. My first thought was the ignition lock itself, so I spent some time jiggling the key in the lock without success.
Why is the key unable to be removed from the ignition?
There are several reasons why the key may be unable to be removed from the ignition switch. The ignition lock cylinder could have worn or fallen tumblers, binding the key and preventing it from being removed.
Why is the ignition key stuck in the steering column?
This was due to the binding of parts within the shift mechanism. Understanding how it works: There is a cable that runs from the gear shifter to the ignition/key in the steering column. This cable prevents the ignition key from being removed unless the shifter is in park.