How do I fix error 49 on hp printer?
Turn the printer off, unplug the printer from the network/computer, clear any pending jobs from the print queue (on the computer), then reboot the printer to make the 49 error disappear. Then you can reconnect the network/computer cable and try printing again.
What is 49 service error on HP printer?
A 49 error typically occurs when the printer attempts to perform an action that the firmware is not capable of performing or might not be designed to handle, for example: Printing files that include unsupported printer commands.
How do I reset my HP LaserJet M3035 MFP?
How do I reset the secure password or do a Factory Reset on HP LaserJet M3035 MFP Series
- Turn off the device.
- Turn on the device.
- When the control-panel display shows that the device has begun to count the memory, press and.
- When the LED lights turn on, release the 6 key.
How do I fix service error 79?
If a printer shows a “79 Service Error” (a common error to HP printers) on the LCD display, do the following:
- Locate the on/off switch on the bottom of the printer.
- Toggle the switch to the off position and COUNT to 10.
- Turn the printer on again and the system should be all set.
How do I know what firmware my HP printer has?
To determine the current firmware level and obtain the IP address, print a configuration page.
- On the printer control panel, select the Administration icon or the Menu button.
- Select INFORMATION.
- On MFP models, open the CONFIGURATION/STATUS PAGES menu.
- Select CONFIGURATION PAGE or the PRINT CONFIGURATION option.
What is difference between cold reset and warm reset?
Reboots can be either cold (alternatively known as hard), in which the power to the system is physically turned off and back on again causing an initial boot of the machine, or warm (or soft) in which the system restarts without the need to interrupt the power.