How do I disarm my Datatool alarm?

With the alarm disarmed, the ignition switched on and the engine kill switch in the run positon, press and hold both buttons on the remote for approximately 10 seconds until the alarm makes a single bleep, then turn off the ignition.

How do I put my Datatool alarm in service mode?

Got a Datatool Evo, with that one you can fully arm it then press the Triangle(left button) & it will put it into ferry mode, ie you can work on it, move it etc, but just do not turn the ignition on, will set the alrm off.

What is Datatool TrakKING?

Datatool TrakKING Adventure S5 offers full journey history logging and the ability to create location or event based alerts. In normal use, TrakKING Adventure will record the vehicle position every 15 seconds and upload that data to the cloud every 2 minutes, giving you a permanent record of every journey.

How do I arm my Datatool alarm?

To fully arm the alarm system to give movement, nudge, trigger switch and battery back-up coverage, press the GREY button on the remote control within 45 seconds of turning the ignition off. The indicators will flash twice.

How do I remove Datatool System 3 alarm?

if you can disarm it , turn ignition on and press and hold the disarm button again until it beeps. this will put it into service mode which wont imobilise the bike or set the alarm. remove the fuse and the alarm battery will eventually go flat over a day or 3.

How do I remove Datatool system 3 alarm?

How much does Datatool TrakKing cost?

Features. Datatool (Scorpion Automotive) has its own in-house monitoring team on duty 24 hours as day, seven days a week. Subscription costs £9.95 per month (£119.40/year) or you can pay £109 annually.

How do you use a Datatool alarm?

From the disarmed state, press both buttons on the transmitter for 10 seconds with the ignition ON until you hear a beep, after the ignition is switched OFF the alarm unit will go into winter sleep mode.

What is the best motorcycle GPS tracker?

Top 10 Best GPS Trackers for Motorcycles

#1 Spytec GL300 GPS Tracker for Motorcycle.
#2 Americaloc GL300W GPS Tracker for Motorcycle.
#3 Amcrest GPS Tracker for Motorcycle.
#4 Optimus 2.0 GPS Tracker for Motorcycle.
#5 LandAirSea 54 GPS Tracker for Motorcycle.
#6 Trak 4 GPS Tracker for Motorcycle.

Can I put a tracking device on my motorcycle?

Make sure the motorcycle GPS tracking device you purchase works with your computer, iPhone, Android, and the corresponding operating system. Fortunately, most motorcycle GPS security devices work with both iOS and Android apps.

What are the specs of a Suzuki GSF600 bandit?

Suzuki GSF600 Bandit: specs. Swingarm with mono-shock (adjustable spring pre-load and rebound damping), 121 mm / 4,76 in – GSF600, GSF600S (1999) Swingarm with mono-shock (adjustable spring pre-load and rebound damping), 126 mm / 4,96 in – GSF600, GSF600S (2000-2004) Single disc, 240 mm, 2-piston caliper Tokico – GSF600, GSF600S (2000-2004)

What kind of swingarm does a Suzuki GSF600 have?

Swingarm with mono-shock (adjustable spring pre-load and rebound damping), 121 mm / 4,76 in – GSF600, GSF600S (1999) Swingarm with mono-shock (adjustable spring pre-load and rebound damping), 126 mm / 4,96 in – GSF600, GSF600S (2000-2004) Single disc, 240 mm, 2-piston caliper Tokico – GSF600, GSF600S (2000-2004)

How to bypass a datatool system 3 motorcycle alarm?

These are controlled by the white and yellow tags on the smaller cable block. So just bridge both the whites, and bridge the yellows to bypass the unit while leaving all of the wiring in place (as shown in the photograph). And that’s it. It’s such a relief to be rid of it!

How to put datatool system 3 Alarm in service mode?

To put Datatool system 3 alarm in service mode first disarm the system same way as before riding your bike. With the system disarmed and ignition ON press and HOLD the smaller button on the fob until an audible beep sound is heard. The ignition can now be switched off. You should now be in service mode.

Navigation