How can I tell if my stator is bad?
The only way to know if it’s your stator is to test the stator itself. Luckily, testing is simple. Even those who aren’t mechanically inclined can test their stator by referring to their service manual and following the steps outlined above. So if you aren’t sure, do the test.
What to do if your stator on your ATV is bad?
This is a free and easy fix so try it out if your battery is still good. Voltage regulator rectifier unit: If your voltage regulator is bad, you’ll have the same problems as if your stator is bad. This can make it difficult to determine, which is the problem. You can test this with a multimeter to see if it is working.
What kind of multimeter do I need to test a stator?
You will need a multimeter set to Ohms for this test. Test every lead of the stator’s connector and note the readings. The reading of each combination should be the same (test leads 1-2, 2-3, and 3-1). If they are different, your stator is defective. Set your multimeter to Ohms.
How to diagnose a bad stator on a Polaris Sportsman?
How to diagnose a bad stator? Consider the following diagram : This is for a Polaris sportsman 700 2003 ATV On the top right corner, you have the information to check if the stator function properly. For the first three coils, everything pass.
What kind of problems can a bad stator cause?
Sometimes it may be just the generating coils that fail, sometimes the CDI source coils. If you know your bike, pinning down the culprit is pretty quick and easy. This post is not being displayed . You can test the output using the AC ranges of a multimeter.
How can I tell if my stator is healthy?
You can test the output using the AC ranges of a multimeter. This post is not being displayed . The first test I do is measure the resistance between all pairs of the yellow wires. which is earth or ground. You want to see megaohms or off the scale here. and may get around say 20VAC. on a healthy stator.
This is a free and easy fix so try it out if your battery is still good. Voltage regulator rectifier unit: If your voltage regulator is bad, you’ll have the same problems as if your stator is bad. This can make it difficult to determine, which is the problem. You can test this with a multimeter to see if it is working.
Can a multimeter be used to test a stator?
Some people opt to replace the stator without checking, but testing a stator is easier than replacing it as long as you have a multimeter. You can get a multimeter for $10-40 on Amazon, so you might as well just have one around for when you need it. In order to test your stator, you only need two things, neither of which is expensive.