How can I synchronize my windows on my Mercedes?
Close the winodws all the way and continue to hold the window switch in “CLOSE” position for an additional 5 seconds. Usually, you will hear a small click when the windows -resynchronize. Tried the window synchronization feature but my windows still don’t work.
How do you close the windows on a Mercedes?
Close all the doors. With the key in position 1 or 2, push the window button until it is completely open. Hold the button for 5 seconds. Pull it up to close and hold again for another 5 seconds.
Why does my Mercedes sunroof not close properly?
Mercedes windows or sunroof does not close properly. MB window closes then drops an inch or a few centimeters. The express up or down (one-touch) feature does not work. Either the windows or the sunroof seems to require several clicks when closing or opening. How do you re-synchronize Mercedes windows? Close all the doors of your car.
When to re-synchronize Mercedes-Benz windows and sunroof?
Re-synchronization of your Mercedes-Benz windows and sunroof may be required if your sunroof and windows don’t work properly. This is a simple procedure that needs to be performed after you disconnect or replace the battery.
Close the winodws all the way and continue to hold the window switch in “CLOSE” position for an additional 5 seconds. Usually, you will hear a small click when the windows -resynchronize. Tried the window synchronization feature but my windows still don’t work.
Close all the doors. With the key in position 1 or 2, push the window button until it is completely open. Hold the button for 5 seconds. Pull it up to close and hold again for another 5 seconds.
Re-synchronization of your Mercedes-Benz windows and sunroof may be required if your sunroof and windows don’t work properly. This is a simple procedure that needs to be performed after you disconnect or replace the battery.
How does a Mercedes Benz power window work?
The way it works is that revolutions of the power window motor are counted and stored in a memory. This memory saves the window start position as zero and the final top position as xxx, after synchronisation. From then on the door control module ‘knows’ the window’s position, and behaves accordingly when the open/closed switches are used.