How big should the brake bolts be on a Toyota Camry?
Tighten the front caliper bolts to approximately 25 ft/lbs, and the rear caliper bolts to 15 ft/lbs. If a new brake caliper was installed, attach the brake hose to the caliper.
How do you replace the brake caliper on a Toyota Camry?
Figure 2. Remove the two bolts from the back side of the caliper. If you are planning to replace the brake caliper, it is highly recommended that the banjo bolt attaching the brake hose to the caliper be loosened prior to removing the caliper from its mount.
How much does it cost to replace brake pads on a Toyota Camry?
Here is the breakdown of the DIY Cost: 1 Front brake pads: $15-35 2 Rear brake pads: $15-35 3 Front brake rotors: $32-70 4 Rear brake rotors: $35-70 5 Front brake caliper: $45-85 6 Rear brake caliper: $40-85 7 Caliper hardware kit: $10-15
Why does my car have a brake caliper?
The brake caliper is the hydraulic component of the disc brake system. Brake calipers compress the brake pads on the rotor surface to stop your vehicle. Over time, brake calipers may develop leaks or the piston inside the caliper may stick. This causes your brake pads to be in constant contact with the rotor and may cause uneven or premature wear.
What should I use to remove a bracket on a Toyota Camry?
1. Bracket Bolt Removal – Apply Penetrating Oil before removal. These bolts have a tendency to shear off if too much torque is applied. The rust buildup on the threads can be overcome with penetrating oil and perhaps a little heat from a torch. Use a 1/4″ socket wrench with a 12 mm socket.
How do you replace the brake rotors on a Toyota Camry?
Torque to approximately 20 ft/lbs. If the rear brake rotors were replaced, adjustment of the parking brake is required. Turn the star-wheel adjuster until the brake shoes are tight and the rotor cannot be rotated. Next, loosen the star-wheel adjustment by one complete turn or seven to eight clicks. Repeat adjustment on the other side. Figure 4.