How are gates belts measured?
Belts are measured by: 1. Pitch: Distance in inches or millimeters between two adjacent tooth centers as measured on the belt pitch line. 2. Pitch Length: Total length (circumference) in inches or millimeters as measured along the pitch line.
What size do V belts come in?
This standard is used for V-belts designed for light-duty applications. It comes in four sizes (2L, 3L, 4L, and 5L).
What is effective length of v belt?
Belt Effective Length: The effective length of a belt is the length about the effective outside diameter of a sheave at a specified tension. The effective outside diameter of a sheave is measured where the groove top width is a dimension as specified by RMA, ASAE or SAE standards.
How is V-belt length measured?
Use a cloth measuring tape (not a steel one) and wrap it around the outside of the belt. You also use a thin string to take this measurement and place it on a steel tape to get the correct length. Next, for “A” Belts (1/2” width) subtract two-inches from the outside measurement to select the correct V-belt.
What is pitch length of timing belt?
Timing belt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the timing belt.
How do you measure a belt length?
Belt width: Measure the width of the belt by placing the measuring tape above the last belt hole and pulling down to the end of the belt below the last belt hole. Belt length: Measure from the far end of the belt buckle across to the far end of the belt past all of the belt holes.
How Do You Measure V belt pulley size?
How To Measure A V-Belt Pulley
- The first thing you want to do is measure the outside diameter (O.D) of the pulley.
- Next, we’ll measure the pitch diameter (P.D), this is the measurement that represents the diameter of the belt it’s self as it rides in the pulley.
- Next measure the wall thickness of the pulley.
Do V belts come in half sizes?
V-Belts come in many sizes and lengths. Click the lengths to see our full selection of that type of belt or for that specific length. …
How many ribs are in a gates Micro V belt?
Gates Micro-V® Belts Part # Product # Description Number of Ribs Effective Length (in) K080510 85528681 K080510 MICRO-V BELT 8 50.95 K080590 85522021 K080590 MICRO-V BELT 8 58.95 K070566 85523472 K070566 MICRO-V BELT 7 56.69 K070665 85687016 K070665 MICRO-V AT BELT GIAC 7 66.53
What makes a Micro V belt so special?
Micro-V belts provide peak operating performance while delivering the highest value on the market. Special belt construction eliminates belt noise, reduces tension loss, and solves problem drive applications. Utilizes advanced materials like Aramid Fiber found in bullet-proof vests and crack and heat-resistant EPDM materials.
When do you need to replace Gates serpentine belts?
Gates recommends replacing serpentine belts at 90,000 to prevent vehicle breakdowns, or as advised by the vehicle manufacturer. Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.