Does the 2012 Jeep Wrangler Sport have air conditioning?
The 2012 Jeep Wrangler Is Offered In Three Trim Levels Manual windows, door locks and mirrors are part and parcel of the Sport’s equipment list while the Wrangler Unlimited Sport sees the addition of air conditioning.
What does p0301 mean on a Jeep Wrangler?
It will often be accompanied by codes P0301 -P0308. These particular codes indicate that there is a misfire in one of the other cylinders as well.
What causes the p2311 OBD-II trouble code?
All our repairs are backed by our 12-month / 12,000-mile warranty. P2311 is an OBD-II generic code for the engine control module (ECM) detecting ignition that coil D or the cylinder 4 secondary circuit has low ionization. This means the coils spark is not lasting long enough. What causes the P2311 code?
What happens if you have a jeep p0302 misfire?
The P0302 trouble code will trigger the Wrangler’s service engine soon light. The vehicle itself may begin to run rough. It depends on how serious the misfire is. The vehicle may produce excess vibration, especially at lower RPM. Fuel mileage may suffer. You may smell raw gas coming from the tail pipe. The vehicle may backfire.
What does the code p0302 mean on a Chevy Silverado?
The nice thing about it is that the P0302 has tracked the problem to a particular cylinder, which makes diagnosing the problems simpler than P0300, which means that the cylinders are randomly misfiring. It will often be accompanied by codes P0301 -P0308.
What does p0304 stand for on a Jeep Wrangler?
P0304 is a relatively common trouble code with any vehicle, that includes the Jeep Wrangler. It’s and OBD2 code and stands for: P0304: Misfire Detected → Cylinder 4. P0304 is certainly a cause for concern, and should be considered a threat to the drivability your Wrangler.
What is the misfire code on a Jeep Wrangler?
Mileage may suffer as well when your Wrangler has P0304 as well. P0304 is a cylinder specific misfire code, which means that Cylinder 4 is misfiring and causing the code.
How much does it cost to repair a p0304 Jeep?
The cost of diagnosing the P0304 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0304 JEEP code detected? Engine Cylinder 4 is Misfiring.
What happens when a p0303 misfire is detected?
The P0303 trouble code will trigger the Wrangler’s service engine soon light. The vehicle itself may begin to run rough. It depends on how serious the misfire is, and how many cylinder’s the engine has. The vehicle may produce excess vibration, especially at lower RPM. Fuel mileage will suffer (often not drastically).