Do you need to replace the seat belts on a Jeep Cherokee?
Working seat belts are necessary for continued safety and are a legal necessity in most states. Unlike replacing other vehicle parts that require standard-sized screwdrivers or wrenches, the seat belt bolts in the Cherokee use a special hexalobular internal driving feature, commonly called a star screw.
What should I do if my seatbelt wont latch?
If the obstruction is not small, you should get to the next step. The solution to a large obstruction is given in the third step and is concerned with the seatbelt cover. Now, process to take the seatbelt buckle holder off one side of the seat.
Where is the anchor bolt on a Jeep Cherokee?
Locate the plastic anchor bolt cover at the bottom of the seat belt connected to the floorboard. Pull the plastic cover directly off to disengage the clips and remove it. The anchor bolt along with an electrical connector is beneath the cover.
Do you have to replace a seatbelt holder?
In this world, something can hardly be perfect. When it comes to a seat belt and seatbelt safety facts, playing a critical role in vehicle safety, it is not rare to see a stuck seatbelt buckle holder. In such a situation, you don’t have to pull at it anxiously. In addition, you do not have to replace it immediately as well.
Why is the seat belt on my Jeep not retracting?
Recently the seat belt hasn’t been retracting. I took a much closer look at it and the area on the pillar where it goes into the door, there is a small crack in the plastic, pressing on the belt.
Do you need to remove a seat belt retractor?
If you need to remove your seat belt retractor or pre-tensioner out of your vehicle, this video will show you how to do that step by step. If your car has been in an accident or a crash, we can repair your seat belts!
Where can I get a seat belt repaired?
Safety Restore is the leader in post-accident restoration, specializing in resetting SRS airbag modules with crash data and had codes as well as repairing locked & blown seat belt and buckle pre-tensioners. To place an order, visit http://www.safetyrestore.com 40 MAIN ST.
How long do seat belts need to be covered?
Some have had it happen to both the driver and passenger side. Really is a safety issue because it just stays loose while wearing it. Seat belts should be covered for at least 10 years, if not lifetime IMHO. Click to expand… Sorry to hear of these concerns!
Working seat belts are necessary for continued safety and are a legal necessity in most states. Unlike replacing other vehicle parts that require standard-sized screwdrivers or wrenches, the seat belt bolts in the Cherokee use a special hexalobular internal driving feature, commonly called a star screw.
Locate the plastic anchor bolt cover at the bottom of the seat belt connected to the floorboard. Pull the plastic cover directly off to disengage the clips and remove it. The anchor bolt along with an electrical connector is beneath the cover.
Where is the scuff plate on a Jeep Cherokee?
The inner scuff plate is a plastic panel along the side of the door frame below the upper mounting bolt that the seat belt retracts into. Insert the screwdriver between the scuff plate the door panel, and pry until you can remove it. The lower mounting bolt is beneath the scuff plate. Remove the lower mounting bolt using a star screwdriver.
How do you remove the seatback trim on a jeep?
Removal of the panel is similar: pull the panel out at the bottom starting with clips 9 and then 10 (takes a good quick pull), then, place the palms of your hands slightly inside of where the #6’s are, push in and then downward in one motion. The panel should fall into your hands. Too bad I didn’t know this in advance.
Recently the seat belt hasn’t been retracting. I took a much closer look at it and the area on the pillar where it goes into the door, there is a small crack in the plastic, pressing on the belt.
Removal of the panel is similar: pull the panel out at the bottom starting with clips 9 and then 10 (takes a good quick pull), then, place the palms of your hands slightly inside of where the #6’s are, push in and then downward in one motion. The panel should fall into your hands. Too bad I didn’t know this in advance.
Is the Jeep Grand Cherokee body on frame?
While some other SUVs were manufactured with body-on-frame construction, the Jeep Grand Cherokee has always used a unibody chassis. They offer comfort, as well as stability and resistance to hard terrain.
Is there a free manual for the Jeep Grand Cherokee?
Every Manual available online – found by our community and shared for FREE. Enjoy! The Jeep Grand Cherokee is a mid-sized sport utility vehicle (SUV) produced by Chrysler`s Jeep Division since 1993. Sold over 3.6 million units in the US between 1994 and 2013, this is one of the most recognizable American vehicles.
What happens when you take the trim cover off a jeep?
I had the seatback trim cover off several times trying various fixes and due to improper removal of the trim cover, I wound up breaking several of the clips and bending (bendgate?) the trim panel permanently. I got a new panel and directions for proper installation of the panel were included in the box.