Can you use generic coolant on a Mercedes Benz?

Can you use generic coolant on a Mercedes Benz?

No, generic universal coolant antifreeze should never be used in a Mercedes-Benz engine. Coolants that do not specifically state the correlating Mercedes-Benz coolant quality specification (Example: MB 325.0) for your engine should never be used.

How often should I Flush my Mercedes Benz coolant?

To maximize corrosion protection and prolong engine life, flushing your Mercedes-Benz coolant antifreeze every 4 to 5 years or every 50,000 – 60,000 miles is recommended. Why?

What happens when coolant is low on a Mercedes?

When the coolant level is low in your Mercedes you will experience a coolant level warning light that will appear on the dash (Instrument Cluster, Gauge Area). Before topping off your coolant you’re going to want your engine to be lukewarm or cold.

When to remove coolant cap on Mercedes Benz?

Never remove the coolant expansion tank cap when the engine is hot. If the coolant expansion tank cap is removed while the engine is hot you will be exposed to hot coolant antifreeze that could burn you cause bodily injury. Always check to see what type of coolant is in your Mercedes when the engine has cooled or cold.)

What should I do about the coolant in my Mercedes?

Next the Mercedes coolant should be drained and refilled. In case the Mercedes coolant present is very old, it can be drained out and the cooling system should be filled with water. After this, the Mercedes should be driven around for a few miles, following which the Mercedes coolant can be drained again.

What happens if there is no coolant in the engine?

If the engine is not becoming hot while it has Mercedes coolant present in it, a lot of pressure may need to be put on the cooling system to find the problem area. Other symptoms of engine damage are if the engine fails to crank, as well as presence of Mercedes coolant in the oil.

How many gallons of distilled water does a W123 cooling system take?

Normally, you will mix the coolant 50/50 with distilled water but you might mix it with a higher concentration of coolant if you live someplace where it gets exceptionally cold. Note that the W123 cooling system takes a total of three gallons.

Is the coolant on a Mercedes om61x indestructible?

The Mercedes-Benz OM61X family of diesel engines, despite their reputation for being indestructible, are no exception to this. With that, it is important to know the process for draining and refilling the coolant on your Mercedes diesel.

What are the specifications for Mercedes Benz coolant?

Mercedes-Benz Specifications for Operating Fluids: Coolant Sheet Description 023.0 Hazardous substances 310.1 General information and specification on 312.0 Anticorrosion/antifreeze additives (wate 320.1 Specified anticorrosion protection/antif

How often should I change my Mercedes Benz coolant?

One of the most frequent questions we get from our customers is how often should I change my coolant? To maximize corrosion protection and prolong engine life, flushing your Mercedes-Benz coolant antifreeze every 4 to 5 years or every 50,000 – 60,000 miles is recommended.

No, generic universal coolant antifreeze should never be used in a Mercedes-Benz engine. Coolants that do not specifically state the correlating Mercedes-Benz coolant quality specification (Example: MB 325.0) for your engine should never be used.

What are the Mercedes-Benz specifications for operating fluids?

The Mercedes-Benz Specifications for Operating Fluids (MB BeVo) is a platform for publishing Mercedes-Benz tested and approved operating fluids for your vehicles and major assemblies. We recommend using exclusively products that have been tested and approved by Mercedes-Benz as: components and operating fluids are tailored to one another,

When the coolant level is low in your Mercedes you will experience a coolant level warning light that will appear on the dash (Instrument Cluster, Gauge Area). Before topping off your coolant you’re going to want your engine to be lukewarm or cold.

What are the problems with a Mercedes windshield washer?

Possible Issues 1 Disconnected Washer Fluid Line / Hose (See fix below.) 2 Mercedes washer fluid reservoir leak 3 Defective Mercedes Windshield Fluid Pump 4 Burned out fuse

The Mercedes-Benz Specifications for Operating Fluids (MB BeVo) is a platform for publishing Mercedes-Benz tested and approved operating fluids for your vehicles and major assemblies. We recommend using exclusively products that have been tested and approved by Mercedes-Benz as: components and operating fluids are tailored to one another,

What’s the best Mercedes-Benz washer fluid to buy?

According to the Mercedes-Benz Dealer, the best washer fluids are Mercedes Summerfit Windshield Washer Concentrate A0019867117 and Winterfit Windshield Washer Concentrate A0019864571. The names are lucidly implicative of what they are. Both of them can be purchased online, see links below. The summerfit will need to be mixed with water.

Do you mix Mercedes summerfit with windshield washer fluid?

These windshield washer fluid concentrates will allow you to make windshield washer fluid by mixing the concentrate (or tablet) with water. Mercedes Summerfit should be mixed with water. This is obviously to dilute the concentrate and also to have enough moisture in the washer fluid to cleanse the dust and dirt.

What are the part numbers for Mercedes coolant?

(Mercedes-Benz coolant part numbers A0009892825, Q1030005, BQ1030005). Mercedes coolant specification MB 325.6 is the premix specification and meets all the same specification and OE part number requirements as the MB 325.5 specification mentioned above.

Can you use tap water in a Mercedes coolant system?

You should never use tap water in your Mercedes coolant system. Tap water can make the cooling system acidic since it contains a variety of unnecessary mineral, iron, chlorins among others that can negatively affect the coolant system.

How often does Mercedes Benz coolant evaporate?

Mercedes coolant specification MB 325.6 is the premix specification and meets all the same specification and OE part number requirements as the MB 325.5 specification mentioned above. It is possible to have some evaporation of the coolant from the cooling system. This might happen around every 30,000 – 40,000 miles.