Can you reuse Honda head bolts?
No do not reuse them. Just because other people have done this and had no problems doesn’t mean you should! Most head bolts are torque to yeld bolts. That means that after they are used once to replace them.
When to replace cylinder head on Honda 3.5L?
• Do not replace the bolt, the bridge or the head unless they are damaged. • To avoid breakage, don’t overtorque the bolts. • The bridge bolts for VCM and V-TEC engines have the same torque values and tightening sequences. Only the VCM cylinder head is shown in the image.
Why does my Honda cylinder head feel stripped?
Note: The bridge is designed to crush around the rocker shaft so when torquing the bolts, it may initially feel like the bolt is stripped. This is normal.
What do I need to install a cylinder head?
Hold the crankshaft pulley and set the socket wrench (A) on the camshaft sprocket bolt. 14. Turn the camshaft clockwise to compress the cam chain tensioner, then remove the 6 x 1.0 mm bolt (B) NOTE: Turning torque should not exceed 44 N·m (4.5 kgf·m, 33 lbf·ft), when turning the camshaft. Do not turn the camshaft counterclockwise. 15.
How to check the oil seal on a cylinder head?
Turn the camshaft clockwise to compress the cam chain tensioner, then remove the 6 x 1.0 mm bolt (B) NOTE: Turning torque should not exceed 44 N·m (4.5 kgf·m, 33 lbf·ft), when turning the camshaft. Do not turn the camshaft counterclockwise. 15. Check the chain case oil seal for damage. If the oil seal is damaged, replace the chain case oil seal.
• Do not replace the bolt, the bridge or the head unless they are damaged. • To avoid breakage, don’t overtorque the bolts. • The bridge bolts for VCM and V-TEC engines have the same torque values and tightening sequences. Only the VCM cylinder head is shown in the image.
Where is the tensioner pulley on a Honda Pilot?
The tensioner pulley is above the guide pulley. Apply counter-clockwise torque to the center 14-mm tensioner pulley bolt to relieve tension on the belt. (This optional step can be performed now or later).
What kind of fuel does a Honda Pilot use?
† Towing requires installation of power steering fluid- and automatic transmission fluid-cooler, both available exclusively from your Honda dealer. Premium unleaded fuel is recommended when towing above 3500 lbs. Capacity of 4500 lbs. is for boat trailers and 3500 lbs. for all other trailers.
When to replace timing belt on Honda Pilot?
Hardlymoving writes about do-it-yourself automobile maintenance on various makes and models. This article shows you, in a video and with written instructions, the replacement of the timing belt, water pump, tensioner and guide pulleys on the 2005 – 2015 Honda Pilot like this one. The service interval is 105,000 miles or 7 years.