Can you remove the gear box on a Nissan Patrol?
You will find that your biggest problem isn’t the bolts but the bell housing (starter motor hump) hitting the transmission tunnel/body before being able to extract transmission. You actually need to rotate the gearbox almost of 1/4 of a turn to clear the body. Removing low range section makes it easier.
How to remove gearbox from white patrol club?
Rotate the gear box while the whole assembly is at its normal position and you should get enough clearence…..Just. Once it is rotated then slowly drop the back end to slide it off the plines. White Patrol Club #18!!!!! and be ready… its FAWKIN HEAVY…. for a chance in life. and be ready… its FAWKIN HEAVY…. Click to expand…
Do you need to rotate the gearbox to clear the body?
You actually need to rotate the gearbox almost of 1/4 of a turn to clear the body. Removing low range section makes it easier. This gearbox is absolute PITA to handle apparently I hope you have decent transmission jack and good luck. I had a look at mine and I don’t wanna get involved TBH.
What happens if you remove the gear box?
Just wondered if you remove the gear box cross member and lower the gearbox therefore letting the engine tilt backwards is there enough room to get at the top 2 bellhousing bolts withg a socket, wobbly and extension. Anyone. Happy Christmas to ALL.
You will find that your biggest problem isn’t the bolts but the bell housing (starter motor hump) hitting the transmission tunnel/body before being able to extract transmission. You actually need to rotate the gearbox almost of 1/4 of a turn to clear the body. Removing low range section makes it easier.
Just wondered if you remove the gear box cross member and lower the gearbox therefore letting the engine tilt backwards is there enough room to get at the top 2 bellhousing bolts withg a socket, wobbly and extension. Anyone. Happy Christmas to ALL.
Why does my Nissan Patrol engine not tilt?
The engine wont tilt anymore because the head is touching the firewall. The clutch release lever dust cover is glued in so I cant get the lever out!. What am I doing wrong?
Rotate the gear box while the whole assembly is at its normal position and you should get enough clearence…..Just. Once it is rotated then slowly drop the back end to slide it off the plines. White Patrol Club #18!!!!! and be ready… its FAWKIN HEAVY…. for a chance in life. and be ready… its FAWKIN HEAVY…. Click to expand…
Why does the transmission not go into gear when the car is running?
The transmission won’t shift and the car makes a grinding sound when the engine is running. Besides, pulling out of first gear will feel harder than normal. The transmission will shift in and out of gear without any issue when the car is not running.
What happens when you pull out of first gear in a car?
Besides, pulling out of first gear will feel harder than normal. The transmission will shift in and out of gear without any issue when the car is not running. It won’t come out of the reverse gear when the car is running. You can push the clutch to the limit but the engine almost halts upon allowing the clutch out.
Where are the starter motor gear boxes located?
All the lower ones and the ones for the starter motor are easy to get at but the top 2 are hard to touch never mind get a socket on them.
Why does my car not shift gears after jump starting?
There could be an issue with either the shifter or the transmission position sensor. If the vehicle was jump-started with the transmission in neutral, then it is possible that the shock from the battery cables being spiked as the jumper cables are connected could have caused the transmission position sensor to fail.
Is the gearbox supposed to work only on your actions?
Unless your car is an automatic, the gearbox is always supposed to work solely on your actions and your actions only. At times, you will be faced with the situation where you shift a gear, step on the accelerator pedal and the car jerks and falls back into the previous gear.
What to do when automatic transmission won’t shift into 3rd gear?
Check the Throttle Cables. Changing the fluid solves plenty of transmission issues but if the problem of automatic transmission won’t shift into 3rd gear persists, the parts you should check are the throttle cables. A defective cable with excessive slack is likely to create issues with smooth shifting of the gears.
When does a bad gearbox make a clunking noise?
Commonly, the noise is loudest when letting out the clutch when taking off from a stop. Alternatively, if the rear transmission is bad in a rear-wheel-drive vehicle, the noise will occur when letting out the clutch in reverse as the tail shaft of the transmission rises up and slams back down. Broken mounts may also result in a clunking noise