Can you push a scissor lift?
So as a general rule with a scissor lift, anytime you move it you should lower the lift all the way (or at least lower than 2 times the width of the base. So if your scissor lift is 4-feet wide, then the platform must be lower than 8 feet in order to move it.
Can you move a scissor lift with a forklift?
Scissor lifts rated for outdoor use are generally limited to wind speeds below 28 miles per hour. Never allow equipment other than the scissor mechanism to be used to raise the work platform (e.g., using a forklift to lift the work platform). • Keep the lift from being struck by other moving equipment on the worksite.
What can you not do with a scissor lift?
Scissor Lift Safety Hazards to Avoid
- Open gates Is a Scissor Lift Safety Don’t.
- Ladders or Step Stools in the Basket Is a Scissor Lift Safety Don’t.
- Climbing onto or Leaning too Far over Guard Rails Is a Scissor Lift Safety Don’t.
- Making Bodily Contact with Electrical Conductors or Entering the Induction Field.
Do scissor lifts have to be on flat ground?
Because of their stability and relatively large platform, scissor lifts are usually used as a work platform. Unlike boom lifts, scissor lifts go in only one direction: straight up. You’ll need to be able to position the base directly beneath the area you plan to work with.
Can a scissor lift fall over?
Have you ever wondered, “Can a scissor lift fall over?” The answer is yes. In fact, a man lift tip-over is one of the most common aerial lift accidents.
How tall does a scissor lift go?
How high can scissor lifts go? The approximate lifting height range is 20 to 50 feet, although 32 to 40 feet is typical. In contrast, boom lifts are now available that can reach heights of up to 185 feet.
How do you raise or lower a scissor lift?
To raise or lower a scissor lift’s platform, an operator must select the off-platform-base key switch and move it to the base position. Next, select the lower-neutral-raise switch and move it to the raise or lower position.
What should you know about scissor lift safety?
Safe scissor lift use includes properly maintaining the equipment, following the manufacturer’s instructions, providing workers training and needed personal protective equipment (PPE), and implementing safe work practices. Here are some scissor lifts safety tips:
Can a scissor lift be electrocuted by a power line?
Since electricity can arc or jump from the power line to the scissor lift or worker, electrocution can occur even if neither the scissor lift nor the worker touches the power line Implement traffic control measures around the scissor lift to prevent other workers or vehicles from getting too close.
Do you need a guardrail on a scissor lift?
Fall Protection – Scissor lifts must have guardrails installed to prevent workers from falling (see 29 CFR 1926.451(g) or 29 CFR 1910.29(a)(3)(vii)). Employers should train workers to: Check to see that a guardrail system is in place before working on the scissor lift.