Can a Mercedes 450SL water pump be replaced?
The Mercedes-Benz 450SL V8 water pump is very straight forward to remove. More than likely you will be changing your thermostat before the pump, but it is always good to be ready for what ever comes down the road. As with many jobs on our classic Mercedes, it is not difficult, but it is a bit time consuming.
Can You restore a Mercedes SL Class 450SL?
– restored door panels and armrests. Full restoration Mercedes SL Class 450SL it’s not a problem for us in Los Angeles. With new leather upholstery, cobvertible top, dash and console, door panels – this car looks like expensive original classic car. We also can do it with your car for good price. Welcome to Best Way Auto Upholstery. Loading…
Can a power steering pump damage a Mercedes 450SL?
According to a long time Mercedes tech, that is not at all good and can damage the “driveshaft” of the power steering pump—makes very good sense. With the necessary components removed, crank the engine clockwise until one of the two notches in the damper align with one of the two bolts to be removed from the water pump.
The Mercedes-Benz 450SL V8 water pump is very straight forward to remove. More than likely you will be changing your thermostat before the pump, but it is always good to be ready for what ever comes down the road. As with many jobs on our classic Mercedes, it is not difficult, but it is a bit time consuming.
According to a long time Mercedes tech, that is not at all good and can damage the “driveshaft” of the power steering pump—makes very good sense. With the necessary components removed, crank the engine clockwise until one of the two notches in the damper align with one of the two bolts to be removed from the water pump.
How do you remove a water pump from a car?
Detach the water pump from the engine by using a socket wrench to take off the bolts. Once the bolts are out, use a screwdriver as a pry tool to dislodge the water pump from the engine block. Scrape the face of the engine block where the water pump is attached with a putty knife to remove any remaining gasket material or debris.
Where is the drain plug on a Mercedes radiator?
Place a drain pan underneath the drain plug of the radiator located on the bottom of the radiator. Open the drain plug with an open end wrench and allow the coolant to drain until the radiator is completely empty. Once it is drained, close the drain plug.
Do you need to remove the water pump?
the water pump. You do not need to remove any of the belts. You will also need to either disconnect the lower radiator hose from the thermostat or the radiator. The photo above shows the breaker bar and socket in place on the crankshaft hex bolt. Turn the engine clockwise only! Never turn the engine with any of the accessories.