Can a Hyundai Elantra not go into first gear?
Will not go into first gear, transmission will “thump” into gear. Transmission fluid level is adequate. See all problems of the 2000 Hyundai Elantra . While driving vehicle will not change gears and wouldn’t increase in speed. Contacted dealership, cannot find problem.
Why does my Hyundai Elantra not go into Park?
See all problems of the 2012 Hyundai Elantra . The gear shift in an automatic drive Elantra car will not shift back into park occassionaly. With some trying it has gone back into park. This could be potentially dangers to someone who stops on a hill and cannot manuever the gear shift back into park.
When to change transmission fluid on Hyundai Elantra?
The owners manual states that it is recommended to have the fluid changed at 30,000 miles if necessary, it was not necessary. The car has 34,000 miles, there was no signs that the transmission was bad. I have made contact several times with motor world and the Hyundai rep.
When did the Hyundai Elantra starter stop working?
On September 9th, 2015, my car was returned to me and was working properly until yesterday September 16th. Please be advised that at 4:08 p. M. Leaving work my car would not recognize the gears and would not start and at 7:19p. M. The same issue occurred. .
When does Hyundai Elantra shift to 1st gear?
The contact stated when driving 65 mph the vehicle will shift on it’s own to 1st gear, and sometimes the vehicle will stay in 1st gear. The driver stated the vehicle will also shift it’s self into neutral and the vehicle will also begin to accelerate on it’s own.
Why is my transmission not working on my Hyundai Elantra?
The contact stated that the check engine light illuminated and the vehicle would shift hard when going from first to second gear. In addition, the vehicle would not shift into reverse or over drive. The dealer stated that the transmission caused the failure.
On September 9th, 2015, my car was returned to me and was working properly until yesterday September 16th. Please be advised that at 4:08 p. M. Leaving work my car would not recognize the gears and would not start and at 7:19p. M. The same issue occurred. .
Why is my Hyundai Elantra stalling at 35 mph?
The contact owns a 2007 Hyundai Elantra. The vehicle was taken to the dealer several times for stalling while driving between speeds of 35 to 40 mph. The dealer replaced the spark plugs wires, and the cylinder. The repair did not correct the failure.
What causes ATF to overheat in Hyundai Elantra?
ATF was overheating due to blockage in the transmission. Had to remove the filter to access the blockage to remove it. Transmission TCC valve inactive when transmission is started out in 3rd gear but is active once the gearshift is put in drive and back into 3rd gear.
Is the Trans TCC valve in the Hyundai Elantra working?
Trans TCC valve is supposed to work in both 3rd and 4th all the time. Car seemed to be slipping (as if on ice) and then would get very sluggish. Was also making a loud clanking noise when hard turns.
Why does my Hyundai Elantra not switch gears?
The contact owns a 2006 Hyundai Elantra. The contact stated that while driving at various speeds, the brake pedal was depressed but the vehicle failed to respond. The contact mentioned that a crash was prevented due to the failure. In addition, the contact stated that while driving at various speeds, the vehicle failed to switch gears.
See all problems of the 2012 Hyundai Elantra . The gear shift in an automatic drive Elantra car will not shift back into park occassionaly. With some trying it has gone back into park. This could be potentially dangers to someone who stops on a hill and cannot manuever the gear shift back into park.
The owners manual states that it is recommended to have the fluid changed at 30,000 miles if necessary, it was not necessary. The car has 34,000 miles, there was no signs that the transmission was bad. I have made contact several times with motor world and the Hyundai rep.
What makes a car not reversing but go into forward?
Car not reversing, but going into forward. infiniti trans… Q: Car not reversing, but going into forward. My car does not go into reverse even though it goes into forward fine. Hello, the transmission your car is equipped with has a dedicated band that locks up to one of the drums to make the trans rotate in reverse.
What kind of gear box does Hyundai Accent GL 5 have?
It has 185k’s on the clock. It’s a 2002 hyundai accent gl 5 speed manual. Take a look at your bushings at the end of the shift cables at the transmission/gearbox. Here is a link to what im talking about http://www.hyundaiperformance.com/forums/maintenance-help/85542-1st-2nd-gear-shift-grind-may.html
Where are the bushings on a Hyundai transmission?
Take a look at your bushings at the end of the shift cables at the transmission/gearbox. Here is a link to what im talking about http://www.hyundaiperformance.com/forums/maintenance-help/85542-1st-2nd-gear-shift-grind-may.html
Why does my manual transmission not go into gear?
One such problem is manual transmission won’t go into gear when running. Any repair or replacement of the transmission components are inconvenient, time-consuming, and requires a handsome amount of money.
It has 185k’s on the clock. It’s a 2002 hyundai accent gl 5 speed manual. Take a look at your bushings at the end of the shift cables at the transmission/gearbox. Here is a link to what im talking about http://www.hyundaiperformance.com/forums/maintenance-help/85542-1st-2nd-gear-shift-grind-may.html
Is the gear shift lever stiff on a Hyundai Santa Fe?
I have a 2008 hyundai santa fe. today i went to shift from park to drive and the gear shift lever was stiff and would I have a 2008 hyundai santa fe. today i went to shift from park to drive and the gear shift lever was stiff and would – Answered by a verified Hyundai Mechanic We use cookies to give you the best possible experience on our website.
Take a look at your bushings at the end of the shift cables at the transmission/gearbox. Here is a link to what im talking about http://www.hyundaiperformance.com/forums/maintenance-help/85542-1st-2nd-gear-shift-grind-may.html
What is fuse 14 on hyndai gear shift?
Fuse #14 is the fuse that provides power to the a/t shift and key lock control module. Fuse #1 also provides a source of power for the module. Check these fuses and let me know.
Why does my Hyundai Elantra not turn the wheels?
If you’ve broken a drive/axle shaft, your Hyundai Elantra’s transmission has no way to turn the wheels anymore. If this were the case, there would not be any movement whatsoever from the vehicle. You also wouldn’t feel the slight jerk your Elantra as you put it into gear.
Is there a problem with the Hyundai Elantra clutch?
The clutch assembly needed replacement with only 80,000 Kilometers (50,000 miles). Hyundai refused to cover this even though there was evidence of uneven wear on the pressure plate. Driven MT cars for almost 50 years and never had a problem.
Will not go into first gear, transmission will “thump” into gear. Transmission fluid level is adequate. See all problems of the 2000 Hyundai Elantra . While driving vehicle will not change gears and wouldn’t increase in speed. Contacted dealership, cannot find problem.
Is there a recall on the Hyundai Elantra automatic transmission?
There is a recall for the power train automatic transmission (NHTSA campaign id # 99v178000) however; the dealer stated that her VIN was not included. As of December 5, 2007, the dealer had not repaired the vehicle. The failure mileage was 160,000 and the current mileage was 170,000.
What are the problems with the 1997 Hyundai Elantra?
See all problems of the 1997 Hyundai Elantra . Consumer states transmission jerks on deceleration/acceleration from stops and then down shifts roughly. Dealer found the transmission starts slipping and banging into gear. Replaced transmission with remanufactured transmission and flush cooler and hook up scanner.
Why does my Hyundai Elantra not transfer power?
If your Elantra is too low on transmission fluid, it’ll will no longer be able to transfer power to the rear wheels. The power goes to the torque converter, and that’s the end of the line. You should check the transmission fluid immediately.
Why is the transmission not shifting on my Elantra?
Took the Elantra in to the service area to be looked at for the transmission not shifting right while going down the road. Shifts hard, slams into gear, gear shifter hard to take from park to another gear. Dealership told use they never have transmission problems with the Elantra.
See all problems of the 1997 Hyundai Elantra . Consumer states transmission jerks on deceleration/acceleration from stops and then down shifts roughly. Dealer found the transmission starts slipping and banging into gear. Replaced transmission with remanufactured transmission and flush cooler and hook up scanner.
ATF was overheating due to blockage in the transmission. Had to remove the filter to access the blockage to remove it. Transmission TCC valve inactive when transmission is started out in 3rd gear but is active once the gearshift is put in drive and back into 3rd gear.
Trans TCC valve is supposed to work in both 3rd and 4th all the time. Car seemed to be slipping (as if on ice) and then would get very sluggish. Was also making a loud clanking noise when hard turns.