Can a Honda K20A2 engine be converted to a jdmaster?
More specific talking, behind the “Kswap” meaning, is the engine conversion of the Honda K20A2 (Europe) or K20A (Japan) found on the Honda Type-r models from 2002 till 2007 (US VERSION are also considered but comes down on engine output) .This engine conversion can be used into older Honda chassis (88 ef, 95 eg, 99 ek, integra dc, del sol etc).
Can a kswap engine be converted to an Integra DC5?
By choosing the European version K20A2 , there are some sectors that you either going to change or modify. The EP3 Typer (EU Spec red top) shifter unit and cables needs to be replaced with the Japan version Integra DC5 or a aftermarket one.
What are the parts of a kswap engine?
The base unit consists of : Engine-gearbox-wiring-ecu-shifter cables- shifter-driveshafts and all ancillaries of sensors-pumps etc. By choosing the European version K20A2 , there are some sectors that you either going to change or modify.
What kind of axle does a jdmaster kswap use?
The stock ep3 36mm (European Type-r version or jdm) axles can work as an option by switching the passenger side axle on the driver side and fitting outter cv joints from Bseries 32mm. Also the ECU in these 2 versions, needs to be mentioned.
More specific talking, behind the “Kswap” meaning, is the engine conversion of the Honda K20A2 (Europe) or K20A (Japan) found on the Honda Type-r models from 2002 till 2007 (US VERSION are also considered but comes down on engine output) .This engine conversion can be used into older Honda chassis (88 ef, 95 eg, 99 ek, integra dc, del sol etc).
When did I do my first K series Swap?
Back in 2008 when I did this swap there weren’t as many K-swap specific parts available but thanks to the likes of K-Tuned and Hybrid Racing and their dedicated development to K-swaps the task at hand is easier than ever.
By choosing the European version K20A2 , there are some sectors that you either going to change or modify. The EP3 Typer (EU Spec red top) shifter unit and cables needs to be replaced with the Japan version Integra DC5 or a aftermarket one.
Can you swap Honda Civic es for K20?
Or you can build your own using your B-series outer CVs and K-series inner CVs and shafts, but you’ll need to swap the shaft from the driver’s side to the passenger side and vice versa for correct lengths. Im swapping my civic ES with a K24. Mix it with a dc5 6speed gearbox and head.