Can a CVT clutch be replaced on a Honda Fit HRV?
Here in Europe there is a bulletin for all CVT models (Jazz, HR-V). It says that there is a special procedure to flush the CVT fluid. Replacing is not enough. Only if second attempt of flush doesn’t help, then the start clutch must be replaced. Cause this is extended warranty this work is made by dealer for free.
What kind of CVT does Honda Jazz have?
I have 2005 1.4 sport CVT which is redeveloping judder at 66000 miles after EGR Oct 2007 (32000 miles), double oil flush August 2008 (38000 miles) & new Start Clutch May 2010 (50000 miles). Regularly serviced but not main dealer.
When to do CVT flush on Honda Fit?
Because you have a fit, Honda NZ can not stand up for other markets. For the extra 1-2k for a Jazz, you are always gonna be better off. Doing the CVT flush is not always gonna fix all your problems. They usually occur after 35,000km. The new CVT replacement schedule for more frequent than before.
Is there a start clutch in a CVT?
There is no ‘start clutch’ in this CVT gearbox. So, the message from the LPL is crystal clear – as there is no ‘start clutch’ so ‘start clutch’ failures will never happen with this new CVT gearbox.
What kind of CVT clutch does Honda use?
Honda actually has a patent on the use of a viscous coupling clutch on their CVT gearbox, which they called Multimatic, back when it was launched in the mid-1990s on the EK3 Civic.
How is CVT used in start clutch calibration?
CVT Start Clutch Calibration Procedures (CVT) CVT Start Clutch Calibration Procedures NOTE: When any of the following items is applied, the feedback signal memory for the start clutch control in the PCM is cleared. The PCM must be memorized the feedback signal for the start clutch control. Disconnecting the battery terminal(s)
How to reset CVT clutch after jump start?
1. Warm up the engine to normal operating temperature (the radiator fan comes on). 2. Start the engine under no-load conditions, then turn the headlights on. 3.
Why is my Honda City CVT clutch position wrong?
When the ECU memory is reset, start-up clutch calibration information is lost and sometimes the ECU detects the clutch full engage/release positions wrongly. Please refer to this thread on Temple of VTEC Asia forum where a very experienced Honda driver WongKN has posted his thoughts on the matter.