Will a S14 transmission fit a S13?
Yes you can use the S13 transmission. Remember the s14 trans has a crank sensor on the upper part of the d/s bellhousing that the s13 doesn’t.
Does S13 have sr20?
The SR20DET is part of the SR family of engines from Nissan. It is a popular inline four-cylinder engine fitted into a variety of cars, generally the Nissan Silvia and 180SX….Comparison table.
| Car | ’94–’98 S13 180sx |
|---|---|
| Compression | 8.5:1 |
| Power | 151 kW (205 hp) @ 6000 rpm |
| Torque | 203 lb⋅ft (275 N⋅m) @ 4000 rpm |
| Turbos | T-25G |
Are S13 and S14 gearboxes the same?
they are virtually identical, and no stronger at all.
What transmission does the S14 have?
Two distinct generations of the 240SX, the S13 (1989–1994) the S14 (1994-1998) were produced based on the Nissan S platform….Second generation (S14; 1994–1998)
| Second generation (S14) | |
|---|---|
| Transmission | 4-speed automatic 5-speed manual |
| Dimensions | |
| Wheelbase | 2,525 mm (99.4 in) |
Is there an S13 SR20DET manual in English?
An S13 SR20DET manual in English is said to be impossible to come by. Most people use the S14 SR20DET english manual for motor related issues and the S13 CA18DET english manual for S13 body related issues. The Japanese S13 SR20DET manual is always available for images and diagrams that are crucial.
Which is the best manual for SR20 tuning?
Most people use the S14 SR20DET english manual for motor related issues and the S13 CA18DET english manual for S13 body related issues. The Japanese S13 SR20DET manual is always available for images and diagrams that are crucial.
Do you need a custom clutch for a Nissan SR20?
It is therefore a great choice, with good gear ratio’s and great strength, but if we are to fit it to the SR20 we will require a custom clutch setup because the splines on the Nissan clutch plate do not match the splines on the Toyota Getrag gearbox.
Can a SR20 gearbox be used as a gearset?
After disassembling a number of SR20 gearboxes for R&D it was determined that a new gearset is an unviable option due to physical size restrictions of the SR20 gearbox housings, thanks to the power, torque and driving styles of the 21st century.
It is therefore a great choice, with good gear ratio’s and great strength, but if we are to fit it to the SR20 we will require a custom clutch setup because the splines on the Nissan clutch plate do not match the splines on the Toyota Getrag gearbox.
Can a S15 gearbox fit in a 180SX?
On the bench it’s still great, but in an S-chassis (and many issues also applies to the R-chassis) it’s greatnesses are its own weaknesses – the gearbox is physically too big to fit in “properly”, the shifter is too far backwards, the bellhousing is huge but the flange is thin, no speed sensor…
After disassembling a number of SR20 gearboxes for R&D it was determined that a new gearset is an unviable option due to physical size restrictions of the SR20 gearbox housings, thanks to the power, torque and driving styles of the 21st century.