Will a D16Y7 distributor work on a d16y8?
The distributor will work. My buddy swaped to a D16Y8 head and he used his Y7 distributor. The throttle body should also bolt up, but I’m not 100% sure!
Can you put a D16Y7 transmission of d15b engine?
Yes it fits. You might need the ECU and an OBD1 conversion harness but dont quote me on that.
Does a d16y8 have a knock sensor?
the d16y8 had a knock sensor. I assume he is using a P2P ECU so he needs to wire up a knock sensor. Wire up a knock sensor to D6 and you’ll be good to go. It’s only a one wire plug.
What should a d16y8 idle at?
Basically, when the car is started completely cold, it will idle at ~2000 RPM. Once it starts to warm up it will idle erratically between about 800 and 1500 RPM. Once it is fully warmed up (fan kicks on) it will idle at 1100 RPM, and sometimes bounce between 1100 and 1200.
Does D16Z6 have knock sensor?
Registered. I am almost 100% positive the D16Z6 (92-95 Civic EX/Si motor) doesn’t have a knock sensor.
Can I use a non VTEC distributor on a VTEC motor?
non vtec dohc dizzys can be used on dohc Vtec engines, with modafiction to the dizzy…. one the legs need to be cut off, the one closest to the vtec sol.
Are all D series distributors the same?
no not all the D series distributors are the same, the si has a seven prong, while the other models have a 5 prong. Also I the part number for the Si is TD02U, other models I think are TD01U, the civics have different part numbers.
Can you do a head swap on a Honda D16Y7?
I am planning to do either a head swap or a full engine swap from a D16Y7 to a D16Y8. I have done some research, but I can’t pinpoint the exact differences between the mini-me and the full swap.
What kind of engine can I swap in a civic?
Integra, Prelude, other civics, even the sport Ute CRV engines can be considered. In addition you can do more than just swap out the whole engine, you could take a Vtec cylinder head and put it on your existing engine or swap out the whole engine and THEN swap the head on that.
What’s the difference between a D16Y7 and D 16y8?
As for the D16Y7 changed to a D16Y8… if you change the head and intake manifold, I believe the only difference between the full D16Y8 swap will be, you’ll have slightly lower compression ratio than the Y8…. otherwise, there’d be no real difference. Click to expand… There is my answer.
Can a Honda Civic get a 1.6 liter?
Doesn’t get increased to 1.6, no… but horse power output comes out about the same, although torque does still stay lower than it would be with the 1.6 liter block.
I am planning to do either a head swap or a full engine swap from a D16Y7 to a D16Y8. I have done some research, but I can’t pinpoint the exact differences between the mini-me and the full swap.
As for the D16Y7 changed to a D16Y8… if you change the head and intake manifold, I believe the only difference between the full D16Y8 swap will be, you’ll have slightly lower compression ratio than the Y8…. otherwise, there’d be no real difference. Click to expand… There is my answer.
Doesn’t get increased to 1.6, no… but horse power output comes out about the same, although torque does still stay lower than it would be with the 1.6 liter block.