Why won t my hyundai sunroof close?
There’s a seperate Tilt button and a seperate Open/Close button. Hold the Tilt buton up and the Open/Close button up at the same time WHILE THE CAR IS ON. And then turn your car off while still holding the buttons. Then turn your car back on and it should work like brand new again.
How do I reset my hyundai sunroof?
Hyundai Sonata: Resetting the sunroof
- Turn the ignition switch to the ON position and close the sunroof glass and sunshade completely.
- Release the control lever.
- Push the sunroof control lever forward in the direction of close (about 10 seconds) until the sunroof moves slightly, then release the lever.
How to manually close hyundai sonata sunroof?
Push the sunroof control lever forward to the second detent position. The sunroof glass will close then the sunshade close automatically. To stop the sunroof movement at any point, pull or push the sunroof control lever momentarily.
How to manually close hyundai ix35 sunroof?
After a few seconds pop up to the vent position, let it go briefly, and then get back on that button. The sunroof should go down, open fully, and then close fully. let go. You may need to get the roof to the closed position first by lightly tapping the switch inward.
How do you close the sunroof on a Hyundai ix35?
Anyway, hold the close button. Keep holding until the roof closes all the way. it should. After a few seconds pop up to the vent position, let it go briefly, and then get back on that button. The sunroof should go down, open fully, and then close fully. let go.
What to do when sunroof stops half way when closing?
It is kind of hard, if you do not know what is supposed to happen, there are instructions In the owners manual. Anyway, hold the close button. Keep holding until the roof closes all the way. it should. After a few seconds pop up to the vent position, let it go briefly, and then get back on that button.
What causes the sunroof on a car to not close?
If you can open and close the sunroof manually, then the motor is broken and needs to be replaced. Step 4 Check the sunroof wiring as a short can cause it to stop working.
How do you replace the J plate on a sunroof?
Replace the J plate and test that the lift arms move fully. Ensure that the sunroof motor is running properly. If there is no power to the motor, the sunroof will remain in the open position. Test the motor by inserting a screwdriver into the center of the motor at the nylon brushing. Turn and push on the screwdriver to work the motor manually.