Why is the electric shift not working on my Honda Foreman?

Why is the electric shift not working on my Honda Foreman?

The Gear selector indicator flashes 5 times and that indicates a ECM motor driver circuit. The 4 wheel drive selector also has stoped working. I have put power direct to the electric shift motor but it appears dead. My next trick is to remove it and put power to it again. Assuming that it is faulty, I would prefer to fix it – brushes or whatever.

Why is my Honda Foreman 500 not working?

How to fix your Honda Foreman 500 Electric Shift Problems. Neutral was blinking 13 times, which means there is a problem with the throttle position sensor. How to fix your Honda Foreman 500 Electric Shift Problems. Neutral was blinking 13 times, which means there is a problem with the throttle position sensor. Skip navigation Sign in Search

Why does my Honda rancher not shift into reverse?

Half way through our 3 day trip it stopped going into reverse. Came home cleaned and rinsed the sensor near the rear of the motor and it began to work again. Now two weeks later it stopped working again completely. It will shift up and down through 1st – 5th gear with no problem, but not reverse.

Is the reverse switch on a Honda ES ATV working?

Check to see if the reverse switch is functioning properly. If not working, replace the reverse switch on a Honda ES ATV by watching the following video. Loading…

Is the Honda foot shift electric or manual?

Many of us have Electric Shift (ES) models. In fact, Honda sells approximately EIGHT times as many ES models for every foot-shift model sold. The ES models are very reliable. But, because of the number of ES machines that are sold and owned, it sometimes seems that there are more difficulties with ES shifting than with manual shifting.

Is there a problem with Honda es shift?

Unfortunately, there has been one problem with ES shifting that has affected many ES owners at one time or another: The problem is that, at times, when you make a shift (up or down) on an ES machine, the shift is not complete.

Check to see if the reverse switch is functioning properly. If not working, replace the reverse switch on a Honda ES ATV by watching the following video. Loading…

How to fix Honda ATV electric shift issues?

Here’s your fix. Stop selling your Hondas cheap and take a few minutes to watch this & I’ll explain what you need to buy to fix the ES non shifting issues. TPS or Angle sensor or low battery voltage. End of story. Google how to replace these items. Good luck fellow riders. Loading…

The Gear selector indicator flashes 5 times and that indicates a ECM motor driver circuit. The 4 wheel drive selector also has stoped working. I have put power direct to the electric shift motor but it appears dead. My next trick is to remove it and put power to it again. Assuming that it is faulty, I would prefer to fix it – brushes or whatever.

What to do if your Honda TRX 450 es shift is not working?

Start with checking the angle sensor since it’s the most common problem. The computer tells the display when it’s in 2/3/4 gear so if it detected a problem with the ES system it will display the –.

What’s the fuse on a Honda shift motor?

The battery is new, I checked all the fuses BTW the wiring diagram calls for a 15A fuse going to the shift motor, but the white fuse box in the battery tray calls for 30A …. not sure what’s up there.

Can a Honda Foreman 500 shift with a wrench?

Yup, the answer was to shift it with a wrench. I hate to tell you, but it is only your fault for buying an ES. I haven’t ever seen one that shifted as good as a manual. I never understood why people feel the need to have a 4 wheeler ride like a car.

Are there any issues with the Honda Foreman 500 es?

I know on the Foreman 450 ES model it was common for the angle sensor to go out and cause a similar issue to what you’re having. Not too familiar with the 500’s but this could be a possibility. Had a Rancher 350 that had the same issue.

Unfortunately, there has been one problem with ES shifting that has affected many ES owners at one time or another: The problem is that, at times, when you make a shift (up or down) on an ES machine, the shift is not complete.

How to fix your Honda Foreman 500 electric shift problems?

How to fix your Honda Foreman 500 Electric Shift Problems. Neutral was blinking 13 times, which means there is a problem with the throttle position sensor. Category Autos & Vehicles Show moreShow less Loading… Advertisement AutoplayWhen autoplay is enabled, a suggested video will automatically play next. Up next

Why is my Honda Foreman 500 blinking 13 times?

Neutral was blinking 13 times, which means there is a problem with the throttle position sensor. How to fix your Honda Foreman 500 Electric Shift Problems. Neutral was blinking 13 times, which means there is a problem with the throttle position sensor. Skip navigation Sign in Search Loading… Close This video is unavailable.

How to fix an electronic shift ( es ) problem?

Hi: You don’t take the shift motor apart — you remove the cover where the shift motor went into and clean out the old grease — put white lithium grease on them gears — also if you removed the spindle gear it has to aligned with the shift shaft. So after what seemed a lifetime, I got my new shift motor. $80 lesson learned.

What to do when Honda Rubicon wont shift?

Push and hold both the up and down shift button simultaniously. While doing this, turn the ignition on and immediately release both shift buttons. The press both shift buttons again for about 2 seconds. The display will not blink as before, but in a rythm. Count the flashes and this is the code being thrown.

Where can I get a Honda es shifter?

You can contact them at [email protected] or call Tyler @ 601-616-3299. Also i purchased for $50.00 with free shipping. Hope you find your answers. Crystal I have recently purchased an Honda ES bolt on shifter from ACE’s in Meridian, Ms. We have installed it on our ATV ourselves and has made all the difference in the world.

When did my oil pressure sensor stop flashing?

Mine started the same thing on January 15th. It will stop flashing from time to time and shift out as usual. For that reason I was assuming it was a sensor or oil pressure/level problem. I have not looked at it as of yet.

Push and hold both the up and down shift button simultaniously. While doing this, turn the ignition on and immediately release both shift buttons. The press both shift buttons again for about 2 seconds. The display will not blink as before, but in a rythm. Count the flashes and this is the code being thrown.

You can contact them at [email protected] or call Tyler @ 601-616-3299. Also i purchased for $50.00 with free shipping. Hope you find your answers. Crystal I have recently purchased an Honda ES bolt on shifter from ACE’s in Meridian, Ms. We have installed it on our ATV ourselves and has made all the difference in the world.

Why is my shift button not working on my Honda?

You can hear the shift motor trying to make the shift when you press a shift button <->, but no shift occurs and, at times, you receive a – – – display. The problem occurs even more often when it is cold outside. Fortunately, the answer/fix to the problem is really very easy!

Here’s your fix. Stop selling your Hondas cheap and take a few minutes to watch this & I’ll explain what you need to buy to fix the ES non shifting issues. TPS or Angle sensor or low battery voltage. End of story. Google how to replace these items. Good luck fellow riders. Loading…

Is the Honda rancher trx350fe shifting problems?

The problem has progressively gotten worse where now you can only ride for a minute or two until it stops shifting. Of course, turning off the key while your in 3rd or 4th gear requires you to then rock the quad while pressing the downshift button to get it back down to neutral so you can start it again.