Why is my motorcycle headlight not working?
If the headlight does not always turn on with the bike, it could be a problem with the relay. Receive a voltage reading on your motorcycle’s battery. If you find that fuses blow frequently on the headlight, or the headlight dims frequently, check the battery voltage with a voltage meter.
How do you reset motorcycle headlights?
Toothpaste method To use this method, get an abrasive toothpaste and use a clean cotton towel or toothbrush to apply the toothpaste to the headlight lens. Do not put too much, but just a fingertip amount and rub all around the headlights in a circular motion.
What to do if your headlight does not turn on?
Test the relay of the motorcycle headlight. If the headlight does not always turn on with the bike, it could be a problem with the relay. To troubleshoot the motorcycle headlight in this case, you would remove the relay, and replace with a known working relay.
What should the voltage be on a motorcycle headlight?
Receive a voltage reading on your motorcycle’s battery. If you find that fuses blow frequently on the headlight, or the headlight dims frequently, check the battery voltage with a voltage meter. Readings should normally be in the 12-13 volts range.
How can I check the wattage of my headlight?
Check the wattage of the bulb that you have in place. Look at your manufacturer’s guidelines to make sure the bulb wattage of the motorcycle headlight is the correct type for your bike. The wattage will be listed on the rear of the motorcycle headlight. Test the relay of the motorcycle headlight.
What should I do if my headlight bulb is burnt?
Examine the plastic pieces around the headlight plug and bulb. If you find the plastic is burnt, or the contacts are dirty, replace the damaged parts. Look for blown fuses or damage to the bulb.
Test the relay of the motorcycle headlight. If the headlight does not always turn on with the bike, it could be a problem with the relay. To troubleshoot the motorcycle headlight in this case, you would remove the relay, and replace with a known working relay.
How to properly aim your motorcycle headlight and passing?
The motorcycle needs to be level because when the bike is on the kickstand, the light angle will not be in the riding position when it is the most important. Step 5. Go over to the wall and make a horizontal line at the same distant from the ground as the middle of your headlight.
Why does my motorcycle headlight not face up?
As the rear suspension compresses, it changes the angle of the headlight so it faces up. If you do not have the suspension compressed, the headlight will not be in the correct position when you ride. This can make the headlight shine right in the eyes of oncoming traffic.
Where are the passing lights on a motorcycle?
Many cruisers have over one headlight at the front of the motorcycle. If you look closely, you may find two additional lights, one on each side, of the main lamp. We know these additional lights as passing lights. Sometimes the bike will come from the factory with the passing lamps already installed.