Why is my dash light not working on my 4×4?
The 4×4 issue could be the T case shift motor, the transfer case control module, the dash switch, or a fuse controlling any of the above. Are the lights glowing on your dash switch?? As for the heated seat, when the light flashes and goes off, you either have a wiring issue, open heating element, or shorted element. w/ 3.55 gears.
When to shift AWD LOCK switch to auto?
If you stop driving with the engine idling and wait until the warning light stops blinking, the AWD returns to the AUTO mode. – When driving straight, shift the AWD LOCK switch to AUTO. Do not operate the AWD LOCK switch when making a turn or backing up.
Why does the 4 wheel drive light stop flashing?
The transfer case neutral position needs to be selected before you attempt to engage 4WD. The selected position indicator light will flash until the transfer case completes the shift. When the shift is complete, the indicator light for the selected position will stop flashing and remain ON.
How does a 4 wheel drive light work?
It accomplishes this by means of a small electric motor bolted onto the transfer case that shifts a pin in place to lock the center transfer differential. The actuator allows you to shift from 2WD to 4WD on the fly and back to 2WD without stopping and can be engaged and disengaged by means of a switch inside the cabin, usually on the dashboard.
What does the 4 wheel drive light mean?
The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.
Why does my 4WD light not come on?
It is electric A4WD my light does not light up and won’t engage. Any help would be great 3 people found this helpful. It is electric and A4WD light won’t come on and it will not engage any help would be appreciated. 4 people found this helpful.
Why does the dash switch indicator light up?
Does the dash switch indicator light up or are all lights dead. If all lights are dead then it sounds like a transfer case control module is dead. Dealer will need to install it as it has to be programmed to the vehicle VIN. 27 people found this helpful. No lights are showing up.
What does the blinking 4 wheel drive indicator mean?
So what is that 4 wheel drive indicator blinking on your dashboard means? The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.