Why is my check engine light on in my 2011 Hyundai Sonata?
If the check engine light in your Hyundai Sonata starts glaring, that means that the problem needs immediate attention and your Hyundai should be brought in quickly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.
What is the turbocharger control code on a sonata?
12-EM-003 or CAN-11-20-007; On some 2011-2012 model year Sonata vehicles equipped with the 2.0T (turbo-GDI) engine, the malfunction indicator light may illuminate with DTC P2562 Turbocharger Boost Control Position Sensor “A” Circuit.
What does the turbo boost control position sensor do?
The Turbo Boost Control Position Sensor (TBCPS) provides additional turbo boost pressure information to the Powertrain Control Module or PCM. This information is typically used to fine-tune the amount of boost provided to the engine by the turbocharger. The boost pressure sensor provides the PCM with the rest…
What does p2562 mean on turbo boost sensor?
The boost pressure sensor provides the PCM with the rest of the information needed for turbo boost pressure calculations. Anytime there is an electrical problem with the TBCPS, depending on how the manufacturer wants to identify the fault, the PCM will set code P2562. This code is considered to be an electrical circuit fault only.
How to check boost pressure actuator position control?
This bulletin describes the procedure to inspect the voltage value for boost pressure actuator position control by using GDS and adjust the EWGA (exhaust waste gate actuator) rod length if necessary. HINT: Check to see if the above TSB has been done yet, if the TSB has not been done, perform the procedures outlined in the TSB.
12-EM-003 or CAN-11-20-007; On some 2011-2012 model year Sonata vehicles equipped with the 2.0T (turbo-GDI) engine, the malfunction indicator light may illuminate with DTC P2562 Turbocharger Boost Control Position Sensor “A” Circuit.
When does turbo boost control position sensor high?
The boost pressure sensor provides the PCM with the rest of the information needed for turbo boost pressure calculations. Anytime the voltage on the TBCPS sensor signal wire goes above a set level (usually over 4.8V), the PCM will set code P2565. This code is considered to be an electrical circuit fault only.
The boost pressure sensor provides the PCM with the rest of the information needed for turbo boost pressure calculations. Anytime there is an electrical problem with the TBCPS, depending on how the manufacturer wants to identify the fault, the PCM will set code P2562. This code is considered to be an electrical circuit fault only.
What does trouble code mean on Kia OBDII?
This trouble code can typically apply to all turbocharged OBDII equipped engines, but shows up more often in certain Hyundai and Kia vehicles. The Turbo Boost Control Position Sensor (TBCPS) converts the turbo boost pressure into an electrical signal for the Powertrain Control Module (PCM).