Why are the lights not working on my Subaru Outback?
If the interior lights do work when the headlight switch is used, that confirms that the tail and illumination relay and the headlight switch are working properly.
What does the VDC warning light on a Subaru Outback mean?
The flashing of the VDC warning light is an indication that the system is attempting to stabilize the vehicle. This may include skid suppression or traction control. Name: Subaru Outback security indicator warning light.
Why are the head and tail lights not working?
The on-board computer turns on the tail and headlights according to the light outside the car. If it is dawn or dusk the head and tail lights will come on by themselves. The light sensors also switch off the daytime lights in some latest models. When the sensor is dirty or damaged it cannot tell if it is dark or day outside.
What does the Mil light on a Subaru Outback mean?
Description: The check engine warning light / malfunction indicator lamp (MIL) may either come on constantly or flash. ▷ Constantly: This indicates an emissions control malfunction. You can continue driving, but may notice poor fuel economy and engine performance. Have vehicle checked as soon as possible.
If the interior lights do work when the headlight switch is used, that confirms that the tail and illumination relay and the headlight switch are working properly.
What to do if your dashboard light does not work?
A blown fuse can disable the vehicle’s dashboard light. The fuse box may be under the hood, or near the floor, near the brake pedal, or there may be two fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary. Note: also check if the tail lights are working.
How are the tail lights and dash lights connected?
Tail lights and dash lights are connected through the tail light (and/or brake light) fuse. When the dashboard goes dark you know you are driving without tail lights. [ [Image:Fix Dashboard Lights That Won’t Light Step 2 Version 3.jpg|center]]
Where is the control switch for the dashboard lights?
Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch. [ [Image:Fix Dashboard Lights That Won’t Light Step 1 Version 3.jpg|center]]
The relay coil rarely is problematic, so it would not likely have caused the fuse to fail. The other three, especially the back-up lights, could be involved. Might want to pull out the two back-up light bulb sockets, remove the bulbs, and inspect both for signs of water, corrosion, or wear.
Why is my abs light on when I turn it off?
After you put your key in the ignition and turn it on, the computer does a test on the anti-lock braking system to ensure it is functioning normally. If the computer doesn’t find a problem, the ABS light will turn off quickly.
How can I tell if my ABS system is working?
The ABS Light is on. The most common sign of an issue with the ABS system is the ABS Light coming on. The ABS Light will show an amber color, and is the equivalent of a Check Engine Light, except it is only to diagnose problems with the ABS system. Older vehicles equipped with earlier ABS systems may not have an ABS Light,…
What causes an ABS sensor to short out?
Damaged ABS Sensor The ABS wheel sensor monitors the wheel rotation, controlled by its computer. This sensor works as a conjunction with the wheel stator attached to axle brake rotor, bearing hub or CV joint. With time, these sensors may short out as they are subject to vibration or road conditions. 3. Faulty ABS Computer Module
The relay coil rarely is problematic, so it would not likely have caused the fuse to fail. The other three, especially the back-up lights, could be involved. Might want to pull out the two back-up light bulb sockets, remove the bulbs, and inspect both for signs of water, corrosion, or wear.
After you put your key in the ignition and turn it on, the computer does a test on the anti-lock braking system to ensure it is functioning normally. If the computer doesn’t find a problem, the ABS light will turn off quickly.
What to do if your ABS system goes bad?
If your ABS control module were to go bad, this dashboard light should come on. The light will likely be an amber color so it will be easy to recognize. However, if you have an older car, then the “check engine” light will be used to indicate this problem instead of the ABS light. Some ABS systems may function even if the ABS light is on.
Where is the fuse panel on a Subaru Outback?
The fuse panel you want to check is behind the coin tray below and to the left of the steering wheel. Just open it and pull back to remove it. Unfortunately, my drivers manual does not list which fuse controls the windows. All the power windows stopped working, luckily they were all up.
When do the parking lights come on in a Subaru?
Okay, 2002. When the ignition is “on” and the headlight switch is turned on (first or second position), both the external clearance and tail lights (“parking lights”) and the lights that illuminate the switches and controls on the dashboard and on the door, should light up.
How can you tell if a tail light bulb is still working?
Unscrew the bulbs in question and check them the way you would any household bulb: by looking at the filament wire inside them to determine if it is still intact. The bulb can be checked by tapping it against your hand to see if the filament is moving or vibrating.
How do you replace a tail light on a wagon?
When removing the tail light assembly (on the wagon), there are two plastic screws with plastic washers that hold the side cover over the combination lamp. Can you purchase replacements for these plastic screws? The last time I changed a bulb I noticed they were falling apart.
Where is the sbf-6 in a Subaru Outback?
SBF-6, in the engine compartment fuse box (not identified in the Owners Manual, but probably shown on a diagram of the fuse box under the cover). Can also check if the Keyless Entry (remote control door lock/unlock) works.
Where does the 12 V go in a Subaru?
There’s a two wire harness that goes from a connector (T1) above the transmission housing to the switch (see attached). One of the wires carries the 12 V from the fuse; the other is the switched side, so normally has power only when the transmission is in Reverse. That second wire goes to the back-up lights etc.
How does the parking light work on a Subaru?
The OP said that all the lights work if the Parking light switch (the one on the steering column) is used to turn the clearance and tail lights on, rather than the headlight (stalk) switch. That suggests the wiring to the lights is good.
Where do the tail lights go on a Subaru?
“P” of the Switch goes to FB-3, which connects to the tail, clearance and license plate lights circuit. When the Switch is in the ON position, the exterior lights work, so that confirms all the wiring from “P” onwards through FB-3.
Why are the low beams in my Subaru not working?
If the low beams in your Subaru aren’t working, it might seem like a good idea to use the high beams–but that can be dangerous, as well. If the high beams work, but the low beams don’t, there are a number of possible causes. Below, we list four of the most common ones. 4. Burned-Out Bulbs
Are there any Subaru Outback fog lights left in stock?
Depo 320-2007L-AS Replacement Driver Side Fog Light Assembly (This product is an aftermarket product. It is not created or sold by the OE car company) . Only 10 left in stock (more on the way). . . Only 14 left in stock – order soon.
What should I do if my Subaru has a low oil level?
When the service indicator light triggers telling the driver “LOW OIL LEVEL,” the driver should purchase the correct brand and weight of oil, as recommended in the owner’s manual, check the level of oil in the engine oil reservoir, and fill the reservoir with the amount of oil needed to fill it up again as soon as possible.
What to do if your Subaru service indicator does not turn off?
If the service indicator light does not turn off, or if you are uncomfortable performing any of these tasks yourself, contact a trusted mechanic immediately to have your Subaru serviced as soon as possible.