Where should you install a wideband 02 sensor?
Ideally, the O2 sensor should be placed at least 24 inches downstream from the cylinder head exhaust ports. This ensures that the O2 sensor takes its measurements after the exhaust gas from each primary merges into a common collector.
How long after turbo install wideband?
Re: how far downstream does a wideband need be? ( Motec recommends within 0.5 meters (so ~20 inches) of the collector on an NA motor, and the same but from the turbo on an FI setup. On our SFWD cars running integrated EMS widebands, they’re usually no farther than 6 inches from the turbo.
What happens if you disable the O2 sensor?
If you remove or disable your O2 sensor, you will not pass state vehicle emissions testing, as this modification is routinely used by those using their vehicles for off-road or track racing purposes. Writer Bio
How can I fake an O2 sensor on my car?
Install the dummy O2 sensor (also called an O2 sensor simulator) by turning it clockwise into the exhaust just as though you were installing a regular O2 sensor. Connect the electrical wiring to the dummy sensor. Lower the vehicle to the ground and start the engine.
Where is the O2 sensor in a manifold?
You will likely find one sensor in each manifold and down tube. The O2 sensor looks like a white spark plug and has a green wire extending out of the top of it. Follow the green wire from the O2 sensor, and locate the wiring harness that connects to it. Unplug the O2 sensor from the wiring harness, and tie the green wire into a loop.
How to install O2 sensors on a Jeep Wrangler?
When installing new O2 sensors, be certain to use some anti-seize on the threads of the new O2 sensors! This is important, and will save you a huge headache should you ever need to remove them in the future. In addition, a O2 sensor socket will greatly aide in the installation and removal of O2 sensors. I recommend this one.
How do you install a wideband oxygen sensor?
One way to do this is by spacing the sensor out from the central part of the exhaust. In effect you are lengthening the bung. Do this by welding an M18x1.5 nut onto your existing bung. Use a nut at least 10 mm (5/ 8”) thick to avoid having to align the spacer’s new threads with the bung’s old threads.
Is the Jeep Wrangler TJ sensitive to oxygen?
Pay close attention to this one so you can do it once and do it right! The Jeep Wrangler TJ is extremely sensitive to all oxygen sensors other than NGK / NTK. Bosch O2 sensors and all the others (including the crappy Chinese brands you’ll buy at your local auto part store) are very well documented as not working properly with our TJs.
How long does tech edge wideband oxygen sensor last?
General Information on Wideband Sensors Tech Edgesupplies only genuine brand name sensors sourced through OEM channels. Wideband LSUsensors manufactured by Bosch(or UEGOsensors from NTK) are designed to last for at least 160,000km (100,000 miles), when installed correctly in a vehicle that has been designed for use with them.