Where is the radiator drain plug?
Hello, the radiator drain plug will be a the bottom edge of the radiator, facing the engine (passenger side). If you drain the coolant, be sure to catch it with a pan of some sort, and properly dispose of it. It will poison animals, and contaminate ground water.
How do you drain Toyota coolant?
Place a drain bucket underneath the bottom of the radiator. Locate the draincock, a white plastic knob located at the bottom of the radiator. Turn it counter-clockwise to open it up and allow the coolant to empty from the radiator. Once it’s empty, reinstall the draincock.
How do I drain water from my radiator?
How to Drain a Radiator
- Turn off all power to the boiler.
- Turn off the gas to the boiler system.
- Shut off the water intake valve.
- Let the system cool down for at least 30 minutes.
- Locate the drain valve at the bottom of the boiler.
- Open the drain valve by turning it counter-clockwise.
Where is the radiator drain petcock?
The petcock is usually always located in the corner of the radiator. Once located, get a pan of some sort, such as a disposable aluminum pan from the store, and place it directly under the petcock. When in place, remove the petcock and let the coolant drain into the pan.
How do I turn my petcock into a radiator?
Doesn’t matter if you’re looking up at the petcock or down at it, it turns counterclockwise. You have to visualize looking straight on to the petcock as it fits into the radiator, and rotate the petcock counterclockwise relative to the stationary radiator.
Where is the drain plug on a Toyota Camry radiator?
The one full twist of the radiator helps relieve that pressure. Place a bucket with a minimum 2-gallon capacity, underneath the radiator and below the drain plug. The drain plug on a Toyota Camry is usually on the back passenger side of the radiator. Open the drain plug and allow the coolant to drain completely from the radiator.
How do you flush the radiator in a Toyota Camry?
In the Toyota Camry, you want to use Toyota Super Long Life Pink premixed coolant. Refill the radiator until it’s within an inch of overflowing. Start the engine and turn the heater to the high setting. Allow the Toyota Camry to run until the cooling fan turns on twice. Then, shut off the engine and check the coolant level.
Where is the overflow hose on a Toyota Camry?
Pull the overflow hose off of the radiator; it is located next to the radiator cap. Then use pliers to loosen the hose clamps on the upper radiator hose, and slide the hose off of the radiator. Figure 6. Location of overflow hose.
Where is the drain valve on a radiator?
A radiator drain petcock is usually located above the bottom of the radiator. So even if you can open it, you’re not draining the radiator completely. That’s why shops always remove the lower radiator hose. That drains the entire radiator AND most of the coolant from the engine.