Where is the power switch on a CD Duplicator?
You may want to try moving the switch over and back while the tower is unplugged. The switch is located on the back of the duplicator where the power cord is plugged in. Source error – Indicates an error related to the master disc or master image. Could be a master media issue, or a bad master format.
What should I do if my CD Duplicator is not working?
Check the levels of ink and the cartridges for signs of poor ink flow, wipe off the cartridge and try again. Autoloader picking up multiple discs at once – It is suggested that you fan the discs before you stack them onto your autoloading duplicator.
What kind of image is on a CD?
If you have a CD (or DVD) with medical images on it, the vast majority of such disks are DICOM CDs. DICOM is the standard format for medical images. Medical imaging equipment manufacturers use the DICOM format to distribute images (just as digital camera manufacturers distribute images in JPEG format).
How can I tell if my disc is a ROM or a reader?
A good test is to use one of the burner drives as a reader, this is done by using the “Select Source” menu option and changing the source from the ROM drive to one of the burner drives. If it works, then you know it was the reader drive and not the master disc.
How can I tell if a CD is on a laser disc?
The laser light is bright enough that one can see the diffused red light from a distance obliquely. A piece of paper the size of a standard CD within the tray can also help, because when the tray closes, one can see the diffused red light on the paper. It is usually bright enough and visible from the other side of the paper.
What are the most common compact disc problems?
7.1) Instant troubleshooting chart – most common problems and likely causes 7.1.1) CD player is totally dead. 7.1.2) CD player is operational but there is no display or partial display. 7.1.3) CD player ignores you. 7.1.4) Drawer does not open or close. 7.1.5) Drawer operation is erratic. 7.1.6) Drawer does not close (or open) completely.
Why does my CD player say no disc?
If the laser has failed, then it will not be able to detect a CD and therefore the error message appears. I normally do two things when this happens. I normally clean the lens just in case there is dust on it obstructing the laser path. If cleaning the lens does not solve the problem then I make sure the laser is working.
What causes a CD changer to stop working?
Possible causes: 1. Worn, stretched, oily, flabby, belt. 2. Dirty mechanism or gummed up lubrication. 3. Foreign object like toy, rock, or runaway disc blocking drawer. 4. Stripped gear or other mechanical damage. 5. Gear timing is messed up. 7.1.7) CD changer jams when selecting or ejecting CDs.