Where can I find a 1998 Kawasaki Prairie 400?
1998 Kawasaki PRAIRIE 400 4X4 (KVF400-A2) Original Equipment Manufacturer Parts at Babbitts Kawasaki Partshouse
What was the dry weight of a Kawasaki Prairie 400?
The Prairie 400’s dry weight was 584 lbs. The wheel base measured 49 inches while ground clearance was 6.4 inches. The front suspension had 6.7 inches of travel while the rear had 7 inches of travel. The front rack had a carrying capacity of 88 lbs and the rear rack had a capacity of 154 lbs.
What kind of engine does a Kawasaki Prairie have?
The Kawasaki Prairie 400 featured a four-stroke, liquid-cooled engine. The engine utilized a single overhead camshaft design with four valves. The bore by stroke ratio was 81 mm by 76 mm. The front brakes were dual hydraulic discs while the rear was a sealed drum brake.
Where is the DC power outlet on a Kawasaki kvf-400 Prairie?
The DC power outlet was found at the base of the handlebars and had a trailer-type connector at the rear of the ATV. The available colors were Firecracker Red and Hunter Green. Tim McQuade began writing in 1999.
What kind of suspension does a Kawasaki Prairie 400 have?
Kawasaki Automatic Power Drive System (KAPS) with High and Low range is fully-automatic so you ‘re always in the right gear without shifting. MacPherson strut front suspension (6.7″) for responsive steering and excellent stability under load. Hydraulic front disc brakes for all-weather stopping power.
How tall is a Kawasaki KVF 400 Prairie?
The total length was 81.3 inches, the width was 46.9 inches and the height was 49.4 inches. The Prairie 400’s dry weight was 584 lbs. The wheel base measured 49 inches while ground clearance was 6.4 inches. The front suspension had 6.7 inches of travel while the rear had 7 inches of travel.
1998 Kawasaki PRAIRIE 400 4X4 (KVF400-A2) Original Equipment Manufacturer Parts at Babbitts Kawasaki Partshouse
The total length was 81.3 inches, the width was 46.9 inches and the height was 49.4 inches. The Prairie 400’s dry weight was 584 lbs. The wheel base measured 49 inches while ground clearance was 6.4 inches. The front suspension had 6.7 inches of travel while the rear had 7 inches of travel.
What was the towing capacity of a Kawasaki Prairie 400?
The total towing capacity was 1,100 lbs. The Kawasaki Prairie 400 featured dual high/low 30 watt headlights. The DC power outlet was found at the base of the handlebars and had a trailer-type connector at the rear of the ATV.
When did Kawasaki start making motorcycles and ATVs?
Founded in 1896, Kawasaki Heavy Industries Ltd. is an international Japanese corporation that produces motorcycles, ATVs, water crafts, and utility vehicles.
What’s the compression ratio on a Kawasaki Prairie 400?
The compression ratio is slightly higher than the 360-class machine at 9.0:1, which eventually changed to 10.2:1 for the 2000 model. Although older Kawasaki vehicles already utilized a KAPS (Kawasaki Automatic Powerdrive System) V-belt converter, the Prairie 400 was the first of Team Green’s four-wheelers to feature a fully automatic transmission.
What causes an ATV starter to not engage?
A common problem on 4-wheelers, particularly Kawasaki Bayou and Lakota ATVs is a starter that will not engage the engine. In this video, I show you what is going on and describe how to replace the Starter Drive Idle Gear Sprocket, which most likely has a worn clutch. Loading…
Founded in 1896, Kawasaki Heavy Industries Ltd. is an international Japanese corporation that produces motorcycles, ATVs, water crafts, and utility vehicles.
What kind of engine does the Kawasaki Prairie 400 have?
2000 KAWASAKI PRAIRIE 400 ATVThe two-wheel drive Prairie 400 features a liquid-cooled, 391cc, single over-head cam, four-valve four-stroke engine; shaft drive; and utilizes the Kawasaki Automatic Power-Drive System (KAPS). The fully-automatic Prairie requires no shifting once the transmission is placed into High or Low range or reverse.
Do you need disc brakes on a Kawasaki Prairie?
The fully-automatic Prairie requires no shifting once the transmission is placed into High or Low range or reverse. There are dual front disc brakes and MacPherson strut front suspension.
A common problem on 4-wheelers, particularly Kawasaki Bayou and Lakota ATVs is a starter that will not engage the engine. In this video, I show you what is going on and describe how to replace the Starter Drive Idle Gear Sprocket, which most likely has a worn clutch. Loading…