Where are the spark plugs on a Honda Pilot?
To remove the plastic engine cover, rotate the three black knobs at the front lower edge of the cover 1/4 turn counterclockwise. Then gently lift the front edge of the engine cover and pull it off. Set the engine cover aside in a safe place. The three spark plugs on the front of the engine are fairly easy to access.
What kind of engine does a Honda Pilot have?
The Honda Pilot is frequently found on critics’ short lists for mid-size SUVs, and the 2007 model is expected to be more of the same. Powered by a 3.5L V6 that makes 244 horsepower and 240 lb-ft of torque, the engine features four valves per cylinder, variable valve timing, and (on the two-wheel-drive models) variable cylinder management.
How can I tell if my vacuum hose is failing?
A good way to check your vacuum hoses would be to look for physical damage. A brittle hose will crackle, break, split, and rubber also deteriorates and blacken your hands after touching. Common signs of a failing vacuum hose include the Check Engine Light illuminating, the engine not running smoothly, and the engine losing power or not starting.
How are ignition coils held in place in Honda Pilot?
The ignition coils are held in place to the engine by a single 6mm hex head bolt. Push in the release tab on the electrical connector before sliding it straight off the ignition coil. Loosen the ignition coil bolt by turning it counterclockwise with a 6mm hex socket and a 1/4″ or 3/8″ drive ratchet. You can also use a 6mm Allen Key wrench.
When to tighten spark plug on Honda crush washer?
If you are installing a new spark plug, tighten the spark plug until you feel the new crush washer collapse, which should be about 1/8 to 1/4 of a turn past when it first makes contact with the cylinder head. Try to avoid over tightening the spark plugs to prevent from cracking the plug or damaging the threads.
What’s the best way to loosen a spark plug?
If you have trouble loosening the old spark plug, spray a small amount of penetrating oil such as PB Blaster, Liquid Wrench or Kano Kroil and wait at least 15-30 minutes before attempting to loosen it again. If you don’t have any penetrating oil, try spraying some WD-40 or warm up the engine for a few minutes to help expand the metal engine block.
How does the ignition coil work on a Honda Pilot?
The ignition coil is the component responsible for giving your minivan’s spark plugs the proper amp currents and voltages. Energy is taken from the vehicle’s battery, converted through your ignition coils for Honda Pilot and then sent over to the spark plugs to use.
When to change spark plugs in Honda Pilot?
How to check or change the spark plugs in the 3.5L VTEC V6 engine of a 1st generation 2003 to 2008 Honda Pilot. This automotive maintenance tutorial was specifically written to assist owners of the first generation (2003, 2004, 2005, 2006, 2007 and 2008) Honda Pilot SUV in checking or changing the spark plugs in the 3.5 liter VTEC V6 engine.
When to replace ignition coil in Honda minivan?
Keep your van happy by replacing your Honda Pilot ignition coil when it breaks with a durable component from AutoZone. The ignition coil is the component responsible for giving your minivan’s spark plugs the proper amp currents and voltages.
If you are installing a new spark plug, tighten the spark plug until you feel the new crush washer collapse, which should be about 1/8 to 1/4 of a turn past when it first makes contact with the cylinder head. Try to avoid over tightening the spark plugs to prevent from cracking the plug or damaging the threads.