Where are the jumper cables in a BMW?
Connect the jumper cables in the correct order to prevent sparking at the battery, which could cause injury. Your BMW has a jump-starting connection in the engine compartment which acts as the battery’s positive terminal, refer also to the Engine compartment overview on page 217. The cap is marked with +. 1.
How to hook up a jumper cable to a car battery?
Leave the rest of the jumper cable on the ground as you bring the clamp over to the car. Double-check the “+” and “-” labels on the battery before attaching the clamp. Squeeze the clamp to open it, then fit it securely around the metal terminal.
What do you use to jump start a BMW?
If the car’s own battery is flat, your BMW’s engine can be started by connecting two jumper cables to another vehicle’s battery. You can also use the same method to help start another vehicle. Only use jumper cables with fully-insulated clamp handles.
What happens if you connect the jumper cable backwards?
Car owners may accidentally connect the jumper cables in reverse order or install the battery backward, which causes the vehicle to no longer start. The purpose of this troubleshooting guide is to help answer the following questions: Hooked battery up backward now car won’t start.
Connect the jumper cables in the correct order to prevent sparking at the battery, which could cause injury. Your BMW has a jump-starting connection in the engine compartment which acts as the battery’s positive terminal, refer also to the Engine compartment overview on page 217. The cap is marked with +. 1.
How to charge a R1200RT trickle charger?
1. Turn the ignition of the motorcycle to “ON”. 2. Connect the battery charger to the “On Board Socket” first, then connect the charger to a 110 volt outlet. 3. Turn the ignition key to the “OFF” position.” Sign up for a new account in our community. It’s easy! Already have an account? Sign in here. R1200RT trickle charger ???
Can a trickle charger work on a BMW?
On the BMW trickle charger question– The BMW (canbus) battery charger is relatively easy to use but has some specifics. Like it won’t work if the basic battery voltage is below 7 volts. There is also a key cycling to get the onboard socket to recognize the charger hook up.
Where is the jump starting connection on a BMW?
Jump-starting. Your BMW has a jump-starting connection in the engine compartment which acts as the battery’s positive terminal, refer also to the Engine compartment overview on page 217. The cap is marked with +. 1. Pull the cap of the BMW jump-starting connection up to remove.