Where are the fuses on a Mercedes Benz SLK?
Fuse box diagram (fuse layout), location, and assignment of fuses Mercedes-Benz SLK (R170) (SLK 200, SLK 230, SLK 320 and SLK 32 AMG) (1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004). The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions stop operating.
What happens when you turn off the fog lights?
If I drive the car and turn on the high beams, the fog lights will shut off like normal, but after turning off the car the fog lights/parking lights/rear lights will NOT turn off and remain on indefinitely.
Why are the lights on my Mercedes not turning off?
Unless you found the trunk full of water, the seals are usually not the problem. The main culpret seems to be the drain hose opening on the right forward edge of the trunk opening that is supposed to catch the runoff from the roof. It gets plugged with debries and overflows.
Where can I buy fog lights for my Mercedes?
In the event that your Mercedes is in need of new fog lights, driving lights, or any other light, our online warehouse has just what you need. We sell high-quality OEM lighting options that are made for Mercedes models exclusively.
Fuse box diagram (fuse layout), location, and assignment of fuses Mercedes-Benz SLK (R170) (SLK 200, SLK 230, SLK 320 and SLK 32 AMG) (1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004). The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions stop operating.
If I drive the car and turn on the high beams, the fog lights will shut off like normal, but after turning off the car the fog lights/parking lights/rear lights will NOT turn off and remain on indefinitely.
Why are the running lights always on in a Mercedes?
Daytime running lights, on the other hand, are typically always on for the sake of visibility of other drivers. When either of these lights are dim or out entirely, visibility on your end and for other drivers is lessened, and your safety is at risk.
What should I do if my Mercedes key fob is not working?
If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light. The light should light up every time you press any of the buttons (Lock, Unlock, Panic, Trunk).
How do you sync the remote on a Mercedes?
Instructions on how to sync Mercedes remote: Insert the key into the ignition. Quickly remove key from ignition and within 10 seconds hold down the lock button. Continue holding the lock button, and at the same time press, the unlock button five times. Next release all buttons and press the gate/trunk button one time.
Fuse box diagram (fuse layout), location, and assignment of fuses and relays Mercedes-Benz SLK (R171) (SLK200, SLK280, SLK300, SLK350 & SLK55 AMG) (2004, 2005, 2006, 2007, 2008, 2009, 2010). The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions stop operating.
What kind of headlamp does a Mercedes’s class use?
W126 S Class 1979-1991 Headlamp Light Adjuster £93.35 W123 E Class 1979-1985 Headlamp Light Adjuster £93.35 W221 – Mercedes S Class 2006-2009 Rear Tail Light (Right) £90.43 W221 – Mercedes S Class 2006-2009 Rear Tail Light (Left) £90.43 CL204 C Class Coupe 2007-2009 Rear Cover RH – Genuine £48.43 W220 S Class 1998-2002 Tail Lamp (Left Hand) £62.27
Where to buy Mercedes tail lamps and headlamps?
A Selection of Genuine Mercedes, and quality aftermarket headlamps, and tail lamps at discounted prices! If the item you require is not listed, simply drop us a line for price and availability. JavaScript seems to be disabled in your browser. You must have JavaScript enabled in your browser to fully utilise the functionality of this website. Top
When did the Mercedes Benz SLK Class come out?
In this article, we consider the first-generation Mercedes-Benz SLK-Class (R170), produced from 1996 to 2004.
Do you need brake light switch for Mercedes?
Very familiar with models such as E 320, C 240, SLK, CLK and several other Mercedes-Benz chassis. Luckily for you this is a very easy repair that you can also perform yourself. All you need is a Brake Light Switch for your Mercedes-Benz model.
Where are the Bas lights on a Mercedes Benz?
If your battery died or you recently replaced the battery, there is a good chance the ABS/ ESP / BAS lights are illuminating on your instrument cluster. To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left.
Where is the K40 relay on a SLK 230?
If those lead to dead-ends, the K40 is worth scrutinizing. The K40 relay is located in the control module box, under the hood. In left-hand-drive R170 SLKs, this box is near the exhaust manifold. A heat shield and a blower motor keep the electronics in the box cool.
How can I repair my Mercedes SLK 230 overload protection relay?
A brass clip (green arrow) keeps the K40 in place. Pressing it outward sets the K40 free. Pull the plugs off the K40 and remove it from the car. A skinny flathead screwdriver can be used to pry the relay board out of the case. Check the relay side of the board for obvious problems: charred or loose connections, etc.
Why is my Mercedes SLK 230 not working?
A non-functioning blower can be a root cause. With the ignition switched on, this fan is audible, and airflow should be felt with the control module’s cover removed. Visual inspection of the K40 might reveal a correctable flaw.
How do you replace a side mirror on a Mercedes SLK?
Alternately, the mirror assembly is easy to remove. The access panels inside the door pop out to reveal the wiring plug and three Phillips screws. The mirror is held to the motor by a small wire clip. Gently pushing the mirror’s bottom inward will create a gap between the top edge of the mirror and the plastic housing.
Are there any Mercedes Benz 3 brake lights left?
Mercedes-Benz 3. Brake Light LED DIM AMG for SLK r171 a171820055664 Only 1 left. Only 1 left. Only 1 left. Original Mercedes-Benz 3. Brake Light LED Brake Light SLK r171 a1718200056 NEW Only 1 left. Only 1 left.
In this article, we consider the first-generation Mercedes-Benz SLK-Class (R170), produced from 1996 to 2004.
Where is the fuse box on a Mercedes Benz SLK?
The fuse box is located on the side of the instrument panel, behind the cover (on the left in the LHD, on the right in the RHD)
How are the parking lights on a Mercedes Benz?
In newer Mercedes-Benz models, like mine above, the parking lights activate in a slightly different way; you must first turn the light switch to “P,” for “parking,” and then you can put on the turn signals to switch on whichever parking lights you want. But this feature still exists, it’s still standard, and, well, does anyone use it?
How to change the fluid in Mercedes Benz SLK?
Click to expand… Look in the w210 forum for 722.6 sticky, how to change the fluid – look at post by Yumling for optimal fluid change, quantity and type of fluid, etc. Type of fluid especially important! You also have to buy or make a dipstick.
Why does my Mercedes zgw control module not work?
Mercedes-Benz Central Gateway Module ZGS (also referred to as CGW) may fail, causing various warning lights or systems to stop working. Mercedes Central Gateway module is the hub that allows communication between various modules. Mercedes ZGW Gateway control module stores data for Mercedes ASSIST or ASSYST plus.
Why does my Mercedes central gateway not work?
When the Mercedes Central Gateway Module fails, one or more of these systems may stop working. Mercedes Central Gateway Module may fail due to water damage. It can also fail from internal software or hardware defects. Damage to the Mercedes Central Gateway Control module can be caused by a blocked drain valve in the trunk floor.
What happens if a CGW fails on a Mercedes?
A bad CGW can also cause the engine to randomly shut off even when driving. You will have several warning lights stay ON on your cluster, and several features stop working. Below is a list of warning lights and problems you may notice if your Mercedes Central Gateway Control module fails.
What causes a Mercedes SAM module to corrode?
Typically this is caused because repair is performed in near the SAM control unit. If the SAM modules are not closed and sealed, properly they will eventually corrode. If a SAM module fails due to corrosion, at first you may notice that electrical problems are intermittent.
Where is the SAM module located in a Mercedes Benz?
The location of the SAM module depends on the Mercedes-Benz chassis. Most SAM modules are usually installed by the fuse box. Mercedes-Benz cars may have a rear and front SAM module. Left SAM in located in engine compartment.
What causes a Mercedes signal acquisition module to fail?
Typically this is caused because repair is performed in near the SAM control unit. If the SAM modules are not closed and sealed, properly they will eventually corrode. If a SAM module fails due to corrosion, at first you may notice that electrical problems are intermittent. Excessive current draw – SAM control units don’t fail often.
What does it mean if your Mercedes Sam is not working?
You should eliminate any other possible issues and even get a second opinion before you replace the SAM unit. If you get an error message that no communication with the SAM module exists, it means that the SAM is defective or it is not getting power. Used Mercedes SAM units are affordable and one option if you have an older MB.
How many rear fog lights are there Mercedes-Benz Forum?
My SLK280 seems to have only a left rear fog light functioning. Do I have a bulb out or is this part of the cars design to have only a left rear fog light? Click to expand… It’s normal, nothing wrong with your car or you. Thanks! Help! My SLK280 seems to have only a left rear fog light functioning.
Are there rear fog lights on RHD cars?
Yes, RHD cars have the single fog light on the right side. Is there a way to enable BOTH fog lamps without hooking it up to a computer? Is there a way to ‘back-door’ program it with the settings display?
Daytime running lights, on the other hand, are typically always on for the sake of visibility of other drivers. When either of these lights are dim or out entirely, visibility on your end and for other drivers is lessened, and your safety is at risk.
Where is the relay module located on a Mercedes slk230?
*Remember to always disconnect the negative battery cable prior to any kind of electrical service. To confirm my diagnosis, I removed the relay module, located inside an electrical box on the passenger side of the engine bay (for left hand drive vehicles. Right hand drive vehicles will be opposite).
When does a Mercedes slk230 K40 fail to restart?
First, the customer complaint: car runs great, no problems, but it will occasionally die and fail to restart. About 15-20 minutes later, it will usually start and all is well until it does it again. Vehicle usually has to be driven 20 minutes or so before failure will occur.
What kind of heater does a Mercedes SLK have?
Asra, 170 545 01 00: Booster heater control module (SLK 200 Kompressor (170.445), SLK 230 Kompressor (170.447), left-hand steering LHS) WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
How do you fix a blown fuse on a Mercedes Benz?
Locate your fuse boxes, and become current with fuse sizes as well as color codes. Conduct fuse testing to find blown fuses. Gain the capacity to replace your fuses, and the potential to insulate yourself from shocking repair bills. This article will help you understand the fuses in your Mercedes-Benz C-Class w204.
Where are the fuses on a Mercedes Benz W204?
Testing fuses in place with a multimeter. Use the Mercedes fuse allocation chart to locate a specific fuse and amperage. For instance, the reading lamps are on fuse #17, rated at 30 amps and located in the under hood box. Figure 6. W204 fuse allocation chart (page 1). Figure 7. W204 fuse allocation chart (page 2). Figure 8.
How many fuses are in a Mercedes K40 relay module?
Remove the four phillips screws and the cover will pop off. Here you can see the module sort of tucked under a wiring harness. The relay module has five plugs (all different sizes so you won’t mess up when you reconnect them!), five 15 amp fuses, and one large red 40 amp fuse.
Where is the F5 fuse on a K40?
On regular occasions the car will cut out, everytime its because the F5 fuse, one of the blue 15 amp fuses located on what is commonly known as the K40 relay module, has blown.
If those lead to dead-ends, the K40 is worth scrutinizing. The K40 relay is located in the control module box, under the hood. In left-hand-drive R170 SLKs, this box is near the exhaust manifold. A heat shield and a blower motor keep the electronics in the box cool.
A brass clip (green arrow) keeps the K40 in place. Pressing it outward sets the K40 free. Pull the plugs off the K40 and remove it from the car. A skinny flathead screwdriver can be used to pry the relay board out of the case. Check the relay side of the board for obvious problems: charred or loose connections, etc.
Remove the four phillips screws and the cover will pop off. Here you can see the module sort of tucked under a wiring harness. The relay module has five plugs (all different sizes so you won’t mess up when you reconnect them!), five 15 amp fuses, and one large red 40 amp fuse.
Is there a battery leak in a Mercedes medic?
Check for any leakage if you have older lead acid battery. Absorbed Glass Mat (AGM) batteries are sealed and you don’t need to worry about leakage. AGM type batteries is what newer Mercedes-Benz cars use. Voltage Regulator may be defective and needs replacement. Test the alternator. Make sure it is generating enough amperage.
What happens when a Mercedes Benz battery is dead?
When the battery is completely dead, you will know as nothing on the car turns on. The battery could be partially discharged in which case you will hear the clicking as shown in the video clip. When the battery is completely dead, you will know as nothing on the car turns on.
Can a battery charger be used in a Mercedes Benz?
It can also cause electronics components in the car to malfunction and trigger under voltage fault codes for the control units in your Mercedes-Benz. The best option would be to use a battery charger if that is possible.
Check for any leakage if you have older lead acid battery. Absorbed Glass Mat (AGM) batteries are sealed and you don’t need to worry about leakage. AGM type batteries is what newer Mercedes-Benz cars use. Voltage Regulator may be defective and needs replacement. Test the alternator. Make sure it is generating enough amperage.
When the battery is completely dead, you will know as nothing on the car turns on. The battery could be partially discharged in which case you will hear the clicking as shown in the video clip. When the battery is completely dead, you will know as nothing on the car turns on.
It can also cause electronics components in the car to malfunction and trigger under voltage fault codes for the control units in your Mercedes-Benz. The best option would be to use a battery charger if that is possible.
How to jump start a Mercedes Benz battery?
Hint: For a safer method to jump start a Mercedes-Benz with a fully discharged battery see Method 3. Method 2 Jump start your car battery with a booster pack / jump starter box. Get a jump box that is powerful enough to turn over a Mercedes-Benz engine. Generally, you need a jump box that has 1000 peak amps or more.
The location of the SAM module depends on the Mercedes-Benz chassis. Most SAM modules are usually installed by the fuse box. Mercedes-Benz cars may have a rear and front SAM module. Left SAM in located in engine compartment.
What kind of headlamp does Mercedes Benz CL203 use?
2008-2011 Mercedes Benz CL203 CLC160 CLC180 CLC200 CLC230 CLC320 CLC350 Adaptive Headlights Not Work Headlamp Ballast Bulb Control Unit Module CLK-Class
How to replace a Mercedes Benz Xenon headlight?
Mercedes Benz W169 A150 A160 A180 A170 A200 OEM Headlight Xenon Ballast Bulb Igniter Control Unit Module Replacement Mercedes Benz W176 A180 A250 A200 A45 A160 A220 OEM Xenon Headlight LED DRL D1S Bulb Control Unit Ecu Module Replacement
Are there any electrical problems with a Mercedes Benz?
Recently we have been working on a Mercedes-Benz with some major and unexplainable electrical issues. The problem started with the Keyless Go feature. The key would unlock the car via keyfob and start it by inserting the key in the ignition. But Keyless Go stopped working.
Why is the push start on my Mercedes not working?
The problem started with the Keyless Go feature. The key would unlock the car via keyfob and start it by inserting the key in the ignition. But Keyless Go stopped working. Push Start or unlocking the car by pressing driver’s door handle stopped working.
Why does my Mercedes not turn off when I Turn Off the key?
The system would start to beep as if you were approaching an object yet there was nothing near the car. Last but not least, the issue with this Mercedes was the engine not turning off when the key was removed from the ignition. While the instrument cluster lights would turn off once you removed the key, the engine would still run.
Where is the fuse block on a Mercedes SLK?
The fuse block is located in the engine compartment on the left-hand side of the vehicle, when viewed in the direction of travel. Open the hood. Use a dry cloth to remove any moisture from the fuse box. Remove fuse box cover (2) forwards.
What’s the problem with the rear sliding door on a Mercedes?
The right hand rear door has been reluctant to open fully when it’s windy (this has been quite a problem of late) – it opens about an inch then stops. The door will not budge from the red button in the back when this happens, nor will it move by pressing the dash button.
The problem started with the Keyless Go feature. The key would unlock the car via keyfob and start it by inserting the key in the ignition. But Keyless Go stopped working. Push Start or unlocking the car by pressing driver’s door handle stopped working.
Recently we have been working on a Mercedes-Benz with some major and unexplainable electrical issues. The problem started with the Keyless Go feature. The key would unlock the car via keyfob and start it by inserting the key in the ignition. But Keyless Go stopped working.
Why are the turn signals not blinking on my slk230-97?
It is a feat of plastic mechanical engineering and contains a folded flexible circuit board that would win any origami prize! I have the same problem with my SLK230 -97, the turn signals stays on instead of blinking. since they stay on it cant be a dry (i.e. bad) solder joint.
Why is my turn signal not flashing on my Mercedes Benz?
It could be a faulty module, or sticking relay on that module, or bad contacts in the connector, or even the switch in the signal stalk. Some have had some success by turning on the emergency hazard signals which seems to unstick the relays in this CCM, if that is the cause.
Why is my left turn signal not working?
It’s typically one or the other. A defective SAM module can cause that one of the turn signals stays on all the time while the rest operate properly. Turn signals on one side (left or right) of the car are not working. Meaning that when you press the switch to turn left (or right) none of turn signals on one side don’t work.
It is a feat of plastic mechanical engineering and contains a folded flexible circuit board that would win any origami prize! I have the same problem with my SLK230 -97, the turn signals stays on instead of blinking. since they stay on it cant be a dry (i.e. bad) solder joint.
It could be a faulty module, or sticking relay on that module, or bad contacts in the connector, or even the switch in the signal stalk. Some have had some success by turning on the emergency hazard signals which seems to unstick the relays in this CCM, if that is the cause.
Where are the fuse panels on a Mercedes Benz?
Here you will find fuse box diagrams of Mercedes-Benz SLK200, SLK280, SLK300, SLK350, SLK55 2005, 2006, 2007, 2008, 2009, 2010 and 2011, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
What happens when a Mercedes Benz fuse blows?
The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions stop operating. If a fuse has blown, the inside element will be melted. Blown fuses must be replaced with fuses of the same rating, which you can recognize by the color and value.
When did Mercedes Benz start making fuse boxes?
Year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010 Fuse box – location Mercedes-Benz SLK (R171) – fuse box diagram – location F32 – Front prefuse F34 – Interior fuse box N10/1 – Driver-side SAM control unit with fuse and relay module N10/2 – Rear SAM control unit with fuse and relay module Luggage compartment fuse box
Asra, 170 545 01 00: Booster heater control module (SLK 200 Kompressor (170.445), SLK 230 Kompressor (170.447), left-hand steering LHS) WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
When did the Mercedes SLK Class come out?
In this article, we consider the second-generation Mercedes-Benz SLK-Class (R171), produced from 2005 to 2011.
What should fuse reading be on Mercedes medic?
The reading should ideally be under 0.05 ampere. Locate the fuse box in your car. Disconnect the fuses one at a time. As you remove each fuse you should check the amperage reading on the multimeter. If the multimeter reading is still high, reinstall the fuse and go to the next fuse.
When did the Mercedes a class fuse box come out?
Fuse box diagram (location and assignment of electrical fuses and relays) for Mercedes-Benz A-Class (A140, A160, A170, A190, A210) 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004.
Fuse box diagram (location and assignment of electrical fuses and relays) for Mercedes-Benz A-Class (A140, A160, A170, A190, A210) 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004.
Is it safe to use a Mercedes Benz fuse?
There is a risk of an accident and injury. Only use fuses that have been approved for Mercedes-Benz vehicles and which have the correct fuse rating for the system concerned. Otherwise, components or systems could be damaged.
Year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010 Fuse box – location Mercedes-Benz SLK (R171) – fuse box diagram – location F32 – Front prefuse F34 – Interior fuse box N10/1 – Driver-side SAM control unit with fuse and relay module N10/2 – Rear SAM control unit with fuse and relay module Luggage compartment fuse box
In this article, we consider the second-generation Mercedes-Benz SLK-Class (R171), produced from 2005 to 2011.
Where are the fuse ratings on a Mercedes Benz?
The fuse ratings are listed in the fuse allocation chart. If a newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Before changing a fuse, secure the vehicle against rolling away and switch off all electrical consumers.
Fuse box diagram (fuse layout), location, and assignment of fuses and relays Mercedes-Benz SLK (R171) (SLK200, SLK280, SLK300, SLK350 & SLK55 AMG) (2004, 2005, 2006, 2007, 2008, 2009, 2010). The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions stop operating.
The fuse ratings are listed in the fuse allocation chart. If a newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Before changing a fuse, secure the vehicle against rolling away and switch off all electrical consumers.
What is the fuse box diagram for a Mercedes Benz?
Fuse box diagrams (fuse layout) and assignment of fuses and relays, location of the fuse blocks in Mercedes-Benz vehicles. Fuse box diagram (fuse layout), location, and assignment of fuses and relays Mercedes-Benz 190, 190 E and 190 D (W201) (1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993).
Here you will find fuse box diagrams of Mercedes-Benz SLK200, SLK280, SLK300, SLK350, SLK55 2005, 2006, 2007, 2008, 2009, 2010 and 2011, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
What’s the speed limit on a Mercedes Benz SLK 350?
In addition to power boosts on SLK 200 KOMPRESSOR and SLK 350, engine speed limit was raised to 6800 rpm, with temporary boost to 7200 rpm across the family (except SLK 55 AMG). Other changes included a higher compression ratio, a new intake manifold and an extensively modified valvetrain.
Where does the Mercedes Benz SLK come from?
Currently the SLK line is in its third generation with the R172 and is manufactured at Mercedes’ Bremen plant. The SLK nameplate designates Sportlich (sporty), Leicht (light), and Kurz (compact). Jump to Manuals
Is the Mercedes Benz R171 SLK a manual car?
The R171 SLK was the last series that a manual transmission was available in a 6 Cylinder Mercedes-Benz Convertible. The successor to the R171, the R172, only offered manual transmission in their 4 cylinder vehicles.
Are there PDFs of Mercedes Benz wiring diagrams?
The PDFs are in English and specifically cover US market cars for some reason. I saved the PDFs on my computer in case the site disappears. If this is a repost I apologize. I ran a search and didn’t find it anywhere on this forum. thanks for the link! I want to install a backup camera in my e320, 2006.
What happens when you break the wiring on a Mercedes?
The result of the broken cables is that the interior light sometimes come on (but not always), the electric window on driverside doesnt go up (down works) and som directions of the electric mirrors wont work. When the weather becomes better i will grab a soldering iron and replace the wiring.
Where can I find the Mercedes SLK owner manual?
Mercedes User Manuals | Repair Manuals | Check VIN Code | Mercedes Resources | Archive Help & FAQ | Special Offers 1. These documents are official SLK-Class owners manuals archived from Mercedes-Benz AMG in the PDF format. 2. Part numbers are equivalent to the printed versions available from local U.S Mercedes-Benz vehicle service centers.
There is a risk of an accident and injury. Only use fuses that have been approved for Mercedes-Benz vehicles and which have the correct fuse rating for the system concerned. Otherwise, components or systems could be damaged.
Mercedes User Manuals | Repair Manuals | Check VIN Code | Mercedes Resources | Archive Help & FAQ | Special Offers 1. These documents are official SLK-Class owners manuals archived from Mercedes-Benz AMG in the PDF format. 2. Part numbers are equivalent to the printed versions available from local U.S Mercedes-Benz vehicle service centers.
What should I do if my Mercedes fuse blows?
If a newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Before changing a fuse, secure the vehicle against rolling away and switch off all electrical consumers. Always disconnect the battery before servicing high current fuses.
Where is the light switch on a Mercedes Benz?
You will need to open the driver side door to give you access to the T20 screw located under the parking brake handle as well as remove the access panel on the end of the dash. Begin by pulling the brake handle out. This will give you access to a single T20 Torx screw located under the handle.