Where are the breaker points and condenser connected in the ignition system?
Between the primary winding of the ignition coil and ground are the breaker points and condenser connected in an ignition system. Between the primary winding of the ignition coil and ground are the breaker points and condenser connected in an ignition system. This answer has been confirmed as correct and helpful.
What are breaker points in an ignition system?
The breaker points control the flow of current through the primary of the coil and open and close approximately 150 times per second in a V-8-powered car traveling 60 miles per hour. Under such operating conditions, the points are closed for approximately 0.005 of a second for each spark created.
What does a condenser do on points?
The condenser absorbs the energy and prevents arcing between the points each time they open. This condenser also aids in the rapid collapse of the magnetic field.
How does a point ignition work without a condenser?
This probably wouldn’t be a danger, because without the condenser, the ignition won’t work. The condenser is charged up (voltage wise), by the current flowing from the coil because of the energy stored in the now collapsing magnetic field. This current flow quickly charges the capacitor, and then the capacitor then sends current back to the coil.
Where does the points and condenser system work?
The points and condenser system is normally found on older model vehicles, such as classic cars. The points and condenser system works with an electrical charge that is sent to an ignition coil, which was connected to the distributor cap.
How is a condenser connected to a spark plug?
The condenser is attached to the system by breaker points. The condenser and distributor rotate so that the points open and close continuously. The current from the ignition flows through the contacts and sends the voltage to the spark plugs, which ignite the fuel.
How does a condenser work in a distributor?
The condenser is a small electrical device connected across the contact-breaker points in the distributor . It helps to give a crisper spark at the plugs and also retards erosion of the contact-breaker points.
How are the points of a condenser ignition explained?
Points/Condenser Ignition Explained 1 The low-tension (primary) circuit, which generates the spark. 2 The high-tension (secondary) circuit, which delivers the spark to the relevant spark plug. More
The condenser is attached to the system by breaker points. The condenser and distributor rotate so that the points open and close continuously. The current from the ignition flows through the contacts and sends the voltage to the spark plugs, which ignite the fuel.
The condenser is a small electrical device connected across the contact-breaker points in the distributor . It helps to give a crisper spark at the plugs and also retards erosion of the contact-breaker points.
What do the breaker points and spark plugs do?
The breaker points opens and closes the primary circuit at the proper time. The spark plug provides the means to fire the air-fuel mixture in the cylinder. The wires connect the components together.