When is the ATF level checked with the engine?

When is the ATF level checked with the engine?

It needs to be checked when it’s in the oil pan. In order for it to be in the oil pan, it needs to drain after it’s been up in the engine. This takes a little bit of time. Engine oil doesn’t expand as much as transmission fluid, so can be checked hot or cold.

Where is the fluid check on a Kia Forte?

But the vehicle needs to be level in order to do the fluid check. The eyebolt is on the top, left side of the valve body cover, and the check port is directly below it, near the bottom of the cover. See if you can locate those 2 first.

How to check your automatic transmission fluid level?

Insert long funnel into automatic transmission fluid dipstick hole. Carefully add automatic transmission fluid in small increments and recheck level each time until fluid level reaches “warm” line.

How can I check the CVT fluid level?

Checking CVT Fluid Level 1. Park the vehicle on level ground (engine running, parking brake set). 2. Using a scan tool, ensure that the CVT fluid operating temperature is within the range of 170°F-180°F (77°C-82°C). 3. Shift the transmission into REVERSE for 5 seconds. 4. Shift the transmission into …

When to change transmission fluid on a forte?

IMO, you might do this around 60K, just because of the number of years. But definitely no rush because the SP4/Type4 fluid used in these transmissions is really good stuff. The first gen Fortes don’t need a transmission fluid change unless something happens to the transmission itself or the seal is bad on the pan.

How to check fluid level in GM af50?

Move the shift lever to all positions from park to drive, waiting at least two seconds at each position. Repeat step 3 and then shift back into park. Raise and support the vehicle. The vehicle must be level, with the engine running and the shift lever in park.

Is it safe to check the transmission fluid level?

WARNING: Checking the transmission fluid level requires working under the hood of your car with the engine running. This can be very dangerous if you aren’t careful. Watch out for moving components, such as fans, fan belts, pulleys, etc.

When to drain and fill Kia Forte transmission?

I did my first drain-and-fill at 75K, and the fluid still looked great. IMO, you might do this around 60K, just because of the number of years. But definitely no rush because the SP4/Type4 fluid used in these transmissions is really good stuff.