When is the anti theft alarm not activated?
The anti-theft alarm will not be activated if the vehicle is locked from the inside using the central locking button . If you unlock the driver door mechanically using the vehicle key, only the driver door is unlocked, and not the whole vehicle.
Why is my anti theft system not working?
When the anti-theft system is activated accidentally, most people suspect a faulty key. While this could be a possible reason, it is a bleak one because the keys made by Ford are usually strong and sturdy. So, before you look to get your key replaced or repaired, try these simple steps to reset the anti-theft system of your Ford.
How do you reset the anti theft system?
Insert the key into the door lock, on the driver’s side door. Turn it on, but don’t turn it back. Instead, hold the position for 40-60 seconds. This indicates to the system that you have the right key. Also, do the same by turning the key in the opposite direction and holding the position.
How does the anti theft system work on a car?
The anti-theft system is one such feature created to protect our vehicle from being stolen, as the name rightly suggests. When the system detects that a person is trying to start the car by using a fake key or some other unconventional method, it ensures that the engine does not start by shutting the supply of power to the engine.
What to do if your anti theft system is locked up?
If the anti-theft system has locked up your engine, you won’t be able to start it. You’ll have to disable it with these steps. Step 1: Check for the anti-theft light. It’s located on your dash and will have a blue or red light. Step 2: Turn the ignition to the “on” position.
It is possible that the system can trigger the car alarm or prevent the engine from running without any apparent reason. You have to shut it off if it is not working properly. The car won’t return to normal operation unless you fix the issue of anti theft device car wont start. How to disengage anti-theft system? These tricks will help:
How to disable the anti theft device in your car?
Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder. Tip: Try turning the key both ways fully to disable the anti-theft system.
What to do when your car alarm wont work?
After inserting the key into the driver’s door lock, turn the key to unlock, lock and then lock position again. Then, turn it again to the unlock position and the alarm is likely to be disabled now. Run the car for at least 10 minutes after cranking the engine to allow the car to reset the alarm. Keep the Car Thieves Away with these 5 Tips!