When does the PSM light come on on a Porsche?
In some cases, even the check engine light may come on . It is also not uncommon for Porsche PSM failure warning message to pop up during freezing weather or heavy rain conditions. In such cases, restarting the vehicle will typically reset the PSM light. PSM failure may come on in a Porsche Cayenne and Panamera.
What does the air suspension warning light mean?
Typically, this will occur if the compressor isn’t providing as much air as it should or if there is a leak in the one of the bags. A leak in one of the bags will cause the ride height to be lower, which is detected by the computer using the height sensor.
How to troubleshoot Porsche ABS and PSM problems?
In this guide, we will go over problems that trigger Porsche Anti-lock Brake System (ABS) and Porsche Stability Management (PSM) to malfunction and how to diagnose it yourself using an OBD-II scanner. What does Porsche ABS/PSM light mean?
What happens when PSM fails on Porsche Panamera?
PSM failure may come on in a Porsche Cayenne and Panamera. If the PSM light came on after replacing the battery, drive your Porsche for ten minutes, and the PSM light should reset. What you may notice when Porsche PSM fails: Auto-stop/start mode deactivated, flashes.
In some cases, even the check engine light may come on . It is also not uncommon for Porsche PSM failure warning message to pop up during freezing weather or heavy rain conditions. In such cases, restarting the vehicle will typically reset the PSM light. PSM failure may come on in a Porsche Cayenne and Panamera.
Why does my 2013 Porsche Cayenne make a thumping sound?
Purchased a 2013 Cayenne Porsche gts with 67K miles on it. Noticed a kind of thumping sound when accelerating, usually appearing at 3K rpms. Vehicle shudders and almost feels like the transmission is slipping. Took the vehicle to a mechanic to diagnose the fault and they immediately knew what it was, engine transfer case failure.
Are there any problems with the 2013 Porsche Cayenne?
In researching the issue I found numerous similar complaints online and found a response from Porsche relating to PE13-009 dated 9/17/2013 (attached). In Porsche’s response to question 10, they claim that the adhesive application was automated and there were no further modifications or changes planned.
In this guide, we will go over problems that trigger Porsche Anti-lock Brake System (ABS) and Porsche Stability Management (PSM) to malfunction and how to diagnose it yourself using an OBD-II scanner. What does Porsche ABS/PSM light mean?
What are the warning lights on a Cayenne?
Porsche Cayenne car warning lights, car warning symbols such as engine management light, ABS light, airbag light this guide will help you. We have created this Porsche Cayenne dashboard lights meaning guide and will show you how to deal with an engine light, airbag warning light, ABS light and all of the other car warning signs on your dashboard.
Purchased a 2013 Cayenne Porsche gts with 67K miles on it. Noticed a kind of thumping sound when accelerating, usually appearing at 3K rpms. Vehicle shudders and almost feels like the transmission is slipping. Took the vehicle to a mechanic to diagnose the fault and they immediately knew what it was, engine transfer case failure.
In researching the issue I found numerous similar complaints online and found a response from Porsche relating to PE13-009 dated 9/17/2013 (attached). In Porsche’s response to question 10, they claim that the adhesive application was automated and there were no further modifications or changes planned.
PSM failure may come on in a Porsche Cayenne and Panamera. If the PSM light came on after replacing the battery, drive your Porsche for ten minutes, and the PSM light should reset. What you may notice when Porsche PSM fails: Auto-stop/start mode deactivated, flashes.
What does the PSM failure, spoiler failure, check engine light mean?
Sometimes when I start the car (apparently when it’s hot out), I get a “PSM Failure” message. This message is sometimes accompanied by a “Spoiler Failure”, other times accompanied by a “Check Engine Light,” and yet other times will appear by itself.
Why is my PSM not working on my Porsche?
Brake light switch causes intermittent PSM failure. It may need adjustment or replacement even if the brake lights work. To find out why your Porsche system has failed, start by reading the ABS / PSM module’s trouble codes. Porsche PSM failures can be diagnosed with a diagnostic scanner.
Why is my abs not working on my Porsche?
If you are getting ABS failure and PSM failure drive to workshop message on the dashboard when you press the brake pedal or start to drive the problem may be the brake light switch. This problem can affect any Porsche, including 911, Cayman, The brake light switch is very inexpensive and takes only a few minutes to replace.
Why is my PSM fail warning light not working?
Searched the web, the brake switch seems to be the common cause. Its still under warranty so am taking to my local OPC tomorrow. I had the same thing happen on my 2012 981 last year. Luckily it was under warranty and the OPC fixed it for what should have been a bill for around £400. And yes, it was the pedal bush failure.
When to turn off PSM on Porsche Boxster 2.7?
Jan 31, 2015 | 2007 Porsche Boxster 2.7 You need to take it to a Porsche dealer to have the computer software updated. The sooner, the better! Until then, turn off your PSM (Porsche Stability Management), to see if that helps.