When does the p0130 fault code come on?
The P0130 fault code is triggered when the vehicle’s powertrain control module (PCM) perceives a problem with the bank 1 sensor 1 oxygen sensor or its circuit. What causes this trouble code and what are the indicators of this problem?
How is the O2 sensor related to p0130?
It is related to P0131, P0132, P0133, P0134, P0135, P0171, or P0175. The job of the O2 sensor is to produce a voltage based on the O2 content of the exhaust. This varies between 0.1 to 0.9V, with 0.1 indicating lean and 0.9 indicating rich. The PCM monitors the voltage while in closed loop to find out how much fuel it needs to inject.
What is the error code for O2 sensor malfunction?
Error Code P0130: O2 Sensor Circuit Malfunction (Bank 1 Sensor 1) 1 Definition. The job of the O2 sensor is to produce a voltage based on the O2 content of the exhaust. 2 Common Symptoms. Depending whether the problem is erratic or not, there may be no symptoms aside from the activation of the Check Engine light. 3 Possible Causes. …
When to set the O2 sensor to lean biased?
If the PCM determines voltage level in O2 sensor to remain below 0.4 V (400 millivolts) for around 20 seconds (differs from one make and model to another) or the Air Fuel Ratio sensor to remain in lean-biased mode for too long (again, depends on the make and model of the vehicle), then the error code Error Code P0130 is set.
How can I tell if I have an error code p0130?
Error Code P0130 is pretty easy to diagnose, and as with other error codes, it requires a scan tool with sensor readings. A qualified technician will use the scan tool to read and determine the problem.
It is related to P0131, P0132, P0133, P0134, P0135, P0171, or P0175. The job of the O2 sensor is to produce a voltage based on the O2 content of the exhaust. This varies between 0.1 to 0.9V, with 0.1 indicating lean and 0.9 indicating rich. The PCM monitors the voltage while in closed loop to find out how much fuel it needs to inject.
Error Code P0130: O2 Sensor Circuit Malfunction (Bank 1 Sensor 1) 1 Definition. The job of the O2 sensor is to produce a voltage based on the O2 content of the exhaust. 2 Common Symptoms. Depending whether the problem is erratic or not, there may be no symptoms aside from the activation of the Check Engine light. 3 Possible Causes.
Can a wrong O2 sensor cause a VW?
Wrong O2 Sensor – If you are getting P0130 after having recently replaced your Oxygen sensor, it may be that the replacement is wrong or bad. Here is a fantastic video that covers all aspects of diagnosing a P0130 trouble code It’s for a VW, but the code is universal.