When does the COMAND system shut down Mercedes Benz?
I persisted with MB technical support; here is how they replied: The E350 has an on-board system which continuously monitors voltage. The Comand system is apparently one of the largest electrical loads on the vehicle. When the level goes beyond a certain threshold, Comand is intructed to shut down.
Why does my car engine not turn off when I remove the key?
Your engine will continue to run even when you remove the key from the ignition because the fuel pump is not shutting off. This problem is typically caused by a faulty fuel pump relay or a defective ignition switch. In this article, we take a look at why your engine won’t turn off when removing the key and what you can do to stop the engine.
Is there a way to turn off the COMAND system?
Upon leaving though you will have to turn the Radio off thru the Comand “on” button since by opening the door this will not shut off the radio. According to what MM9351 wrote underneath his member name, the car is equiped with P2. That means he has the keyless start/stop feature. Unless of ofcourse he took the button out and is using the key.
Why does my car stop when I press the stop button?
On vehicles equipped with the Start/Stop convenience feature, the engine may not stop when you press the STOP button. A defective Push Start button can cause this problem. If the button stops working, it may need to be replaced.
What happens when car shuts off without warning?
Driving 70mph on highway when car shut down. No power and no brakes. Was able to get onto shoulder and car automatically went from d into p on its own once it came to complete stop. Car restarted and was able to finish trip with no other problems.
What does it mean when your engine won’t restart?
Your engine will not restart unless your vehicle is serviced by your authorized dealer. This message be continuously displayed. The message will be accompanied by a single chime. Your Malfunction Indicator Light will be continuously illumined. We highly dealer if the message appears while engine is running.
Why does my car not start when I push the start button?
On late-model cars with “smart” keys, the key fob transmits a signal that tells the engine that the driver is in the car and allows the engine to be started with a push button instead of a traditional key. If the battery inside the fob has died or the transmitter stops working, there’s no signal, and your car won’t start.
Why did my Ford Fusion engine shut off without warning?
The contact was able to glide the vehicle to the side of the road and activated the hazard lights. When the contact removed and re-attached the battery cable, the vehicle was finally able to restart. The manufacturer stated that the vehicle had too many miles to cover the repairs by warranty and there were no recalls.
How long does it take for the COMAND system to shut down?
The Comand system on my W212 shuts down in approximately 2 -3 minutes while in accessory mode (engine not running). I imagine this is to conserve battery power. The system shuts itself off, without warning, whether you are in the process of recording music files to the registry, watching DVD video, etc. This makes no sense.
What’s the difference between’03 and’04 comands?
Oh, the ’03 and ’04-’06 COMANDs are VERY different. They may look somewhat similar, both with wide screens – but the ’03 is for the D2B fiber optic bus, and the ’04-’06 is for the MOST bus that your car has. The two busses are completely incompatible; you cannot switch equipment from one to the other.
I persisted with MB technical support; here is how they replied: The E350 has an on-board system which continuously monitors voltage. The Comand system is apparently one of the largest electrical loads on the vehicle. When the level goes beyond a certain threshold, Comand is intructed to shut down.
When was the last time I serviced my Mercedes’s 550?
Mileage: 58,148 miles Body Type: Sedan Color: White Engine: 8 Cyl 4.7 L No accident or damage reported to CARFAX. Purchased on 10/29/13 and owned in FL until 05/27/21. Driven an estimated 8,133 miles/year. Last serviced at 59,237 miles in Lakeland, FL on 11/20/20 • Vehicle serviced • Vehicle washed/detailed.
Upon leaving though you will have to turn the Radio off thru the Comand “on” button since by opening the door this will not shut off the radio. According to what MM9351 wrote underneath his member name, the car is equiped with P2. That means he has the keyless start/stop feature. Unless of ofcourse he took the button out and is using the key.
The Comand system on my W212 shuts down in approximately 2 -3 minutes while in accessory mode (engine not running). I imagine this is to conserve battery power. The system shuts itself off, without warning, whether you are in the process of recording music files to the registry, watching DVD video, etc. This makes no sense.
What to do if Mercedes check engine light is on?
1. Turn ignition to position II. All dash lights should be on. Don’t start the car. 2. Locate the OBD-II port under the dashboard. Location of OBD II port used to retrieve Mercedes-Benz fault codes. 3. Plug your OBD II scanner and let it turn on. Use an OBD II scanner to check why the Check Engine Light is ON.
What happens when catalytic converter is clogged in Mercedes?
If your catalytic converter is clogged you will notice a drastic drop in fuel efficiency and real struggle getting your Mercedes to accelerate. If the cat is completely clogged your car won’t even start.
Why does my Mercedes Benz engine misfire so often?
Engine misfires are one of the most common problems we see in many Mercedes-Benz cars. To be honest, it is not because MB cars are weak in this area, but because most owners forget that spark plugs are wear items and need to be replaced at the recommended intervals.
What should I do if my Mercedes Benz won’t start?
Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.
What are the problems with a Mercedes Benz?
Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More
If your catalytic converter is clogged you will notice a drastic drop in fuel efficiency and real struggle getting your Mercedes to accelerate. If the cat is completely clogged your car won’t even start.
Why is the battery on my Mercedes Benz not working?
Hint: Starter Problem or Low Battery This may seem obvious, but an old battery is the root of many headaches and can cause all sorts of malfunctions on Mercedes-Benz cars. How old is the battery on your Mercedes-Benz?
How do you reset adaptive shifting on a Mercedes Benz?
This procedure will reset the adaptive shifting points in your Mercedes-Benz automatic Transmission Control Unit (TCU). These simple do it yourself instructions take less than 5 minutes. No tools are required to perform this procedure and make your Mercedes-Benz shift like new.
Is there a shutdown command in Windows Server 2008?
Windows Server 2008 Shutdown Command LineSwitches. Shutdown is a useful built-in command line program found in Windows Server 2008 and client operating systems such as Windows 7. Administrators love experimenting with this utility because it has such a dramatic effect – it can down or reboot a server.
Which is the shutdown command for the remote operating system?
Shutdown -s -m \\ComputerName, in this example, ‘ComputerName’ is the hostname of the remote operating system. None of these commands is case sensitive so sHUTDOWN /R /m \\ComputerName would work just as well. \\ ComputerName would not work. Note 2: If you substitute -r for -s that would mean ‘Reboot’ and not Shutdown.
How to fix a Mercedes Benz navigation system?
Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order. Chances are the symptoms may return. If this happens repeatedly, a professional Mercedes Benz repair technician or mechanic can help check any updates for your COMAND / navigation unit. Find the fuse box under the dashboard.
How to troubleshoot Mercedes Benz air suspension problems?
Learn how to troubleshoot Mercedes-Benz Air Suspension Problems. You decide to buy a Mercedes-Benz, maybe an S-Class, CLS-Class, R-Class, CL-Class or E-Class. One day you hear of other Mercedes-Benz owners having suspension problems. The next day you start having air suspension problems yourself.
How to troubleshoot your Mercedes medic air conditioner?
Turn the A/C ON. If you have an Economy button make sure that is off. Make sure fan is on HIGH, temperature selector is turned all the way to COLD, and that the A/C and recirculate light indicators are on. Set the temperature to cold, the lowest setting. Set the cooling fans on high on the climate control.
Where is the shut down button on a Mercedes Benz?
This is located behind your ignition tumbler. Remove the instrument cluster and remove the switch’s connector by wiggling it out very slowly and carefully. Remove the three screws, replace the unit, reinstall the three screws and reinstall the connector.
How to turn off miserable stop / start on W205 c250?
On my W205 C250, I do the following. Go to the AGILITY switch on your centre console. Select INDIVIDUAL. Press down the COMAND controller knob to activate ADAPT. Adjust the four settings to suit how you want your AGILITY to operate for you.
What to do if your Mercedes Benz Radio is not working?
For you to do that, you will need to remove the fuses for the CD Changer, COMAND/ NAV / DVD Player / Radio, Audio Gateway AGW, and the Voice Unit if it is equipped with one, for at least 10 minutes. Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order.
Is there a way to reset the COMAND controller?
Select Vehicle in the main function bar by turning the COMAND controller and press to confirm. Select System by turning the COMAND controller and press to confirm. Select Reset and press to confirm. A prompt appears asking whether you wish to reset. Select Yes or No and press to confirm. If you select No, the process will be aborted.
What does COMAND do in Mercedes Benz C class?
In fact, the COMAND NTG 4 has a more powerful processor and more memory than all of the computers used to put Apollo 11 on the moon. The COMAND (Cockpit Management and Data) System controls your nav, audio, video, and telephone systems. It controls your rear view camera, seat position, rear seat audio, and can be trained to recognize your voice.
Why does my Mercedes central gateway not work?
When the Mercedes Central Gateway Module fails, one or more of these systems may stop working. Mercedes Central Gateway Module may fail due to water damage. It can also fail from internal software or hardware defects. Damage to the Mercedes Central Gateway Control module can be caused by a blocked drain valve in the trunk floor.
What to do if your Mercedes COMAND control knob is broken?
Save money by simply replacing the broken plastic shaft with a new aluminum version of it. You can replace the broken shaft yourself or send your Mercedes COMAND unit to a company such as IE Works, which will repair your unit and return it to you. Here is a link where you can order their service: Mercedes COMAND Broken Shaft Service on eBay
What happens when your car shuts off while driving?
If your car suddenly stops running, the alternator may have gone bad. A faulty alternator will cut the power supply to vital car components, and you will notice the lights turning off in the dash or the engine abruptly losing power. Mostly if your alternator is going bad, you will experience a red battery light on your dashboard now and then.
What happens if the check engine fails at 50 mph?
While driving 50 mph, the check engine and RPM warning lights illuminated. In addition, the engine made a loud unknown noise and the vehicle began to lose speed. The failure recurred three times. The vehicle was taken to the dealer where the fuel pedal was replaced; however, the failure recurred. The manufacturer was notified of the failure.
Why is my Mercedes Benz gear shift stuck?
Gear shift stuck is one of the most common problems with Mercedes-Benz cars. Unfortunately, looking to see if the brake lights turns on while you press the brake pad, is not a good test to tell if the brake light switch is working properly.
What happens if central gateway control module fails?
The central gateway control module can also allow systems to work at times and then shut them down unpredicted times due to a bad or corroded connection or terminal. A bad CGW can also cause the engine to randomly shut off even when driving. You will have several warning lights stay ON on your cluster, and several features stop working.
What causes a Mercedes central gateway to fail?
One or more of the following lights may come on. When the Mercedes Central Gateway Module fails, one or more of these systems may stop working. Mercedes Central Gateway Module may fail due to water damage. It can also fail from internal software or hardware defects.
What’s the problem with my Mercedes C class?
21 people found this helpful. its the same problem in my 2002 c200,it caused by the nuetral pooly and the engine fountdation……. 78 people found this helpful. Is that an easy fix?, 25 people found this helpful. you have to put arround 12-15 grands for the fix and have to order parts from company. 14 people found this helpful.
What should I do if my Mercedes fuse blows?
If a newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Before changing a fuse, secure the vehicle against rolling away and switch off all electrical consumers. Always disconnect the battery before servicing high current fuses.
Where is the fuse on a Mercedes-Benz W203?
Twist screws (1) 90° counterclockwise. Slide-out retainer (3) and remove the cover by pulling towards the front. Install cover (2) in reverse order. It is on the left-hand side of the trunk. Japan version: VICS+ETC voltage supply separation point.
This is located behind your ignition tumbler. Remove the instrument cluster and remove the switch’s connector by wiggling it out very slowly and carefully. Remove the three screws, replace the unit, reinstall the three screws and reinstall the connector.
Where is the date code on a Mercedes Benz?
Your problem is “most likely” electric. Check the date code and brand name on your OVP (over voltage protection) relay. It is behind the battery next to your ECU. If it has a date code (mercedes/siemens/KAE mostly has it) it will be “work week”.year. Something like 25.07, meaning WW25 of year 2007.
Why does my car shut down while driving?
The car is automatic (not manual). I’m driving in my car just like a normal person and all of a sudden the RPM starts dropping to zero then going back up to 9 a couple of times afterwards it shuts down. It doesn’t matter what the speed I’m driving at.