When does the anti lock brake warning light come on?

There are times when the anti-lock brake warning light may come on on your car’s dashboard when the brakes are in good condition. It may even happen after you have recently had the brakes serviced. If you know your car’s anti-lock brake system is in good condition and the light is still on, there are some steps you can take to reset the light.

Why is the ABS light on on my GMC Sierra 1500?

ABS Light Due to Poor Electrical Ground Under the Battery Tray on GMC Sierra 1500. Problem Description. A poor electrical ground under the battery tray may cause the ABS warning light to illuminate.

Why does my car have an anti lock system?

Modern vehicles have what is known as an anti-lock braking system. The purpose of this system is to keep the driver safe by preventing the wheels from locking up as you apply the brakes.

What to do if your GMC Sierra has brake light?

If all is good, you could contact a GM dealership and have them scan your system with a Tech2 scanner. That would be able to tell you exactly what wheel is causing the trouble and DTC. ( diagnostic trouble code). Or you could pull each wheel, disconnect the bearing harness, hook up a continuity tester to the two leads and spin the bearing.

Can a parking brake light be activated by ABS?

Usually, the brake fluid level sensor and the parking brake are the only two items that can activate the BRAKE light. But, not all vehicles are the same, and some of the earliest ABS systems would trigger both lights simultaneously for any ABS fault.

What does the anti lock braking system do?

Basically, the function of the anti-lock braking system is to keep your vehicle’s tires on the road as you aggressively step on the brake. That way, the wheels don’t lock up or skid uncontrollably on the road during the braking process. This is particularly important if the road is slippery or wet.

What causes the ABS and brake light to illuminate?

If the meter changes its reading, then that bearing is good. If it stays at 0, then the wire internally is broken, causing an open circuit, therefore causiung the ABS/brake light to illuminate. Good Luck

Why is my anti lock brake light on?

The anti-lock brake system is a complex configuration of computers and sensors. When all of the components are working in perfect harmony, it ensures a quick, reactive system that can improve braking control under all surface conditions. Faults in this system are often first indicated by illuminated lights in the gauge cluster.

What kind of brakes does a 2001 Chevy Silverado have?

The Silverado name replaced the C/K-series monikers altogether in 1999. The 2001 Silverado was available with a multitude of engines and drivetrains, from the base model 1500 to the 3500HD. The anti-lock brake system on the 2001 Silverado was responsible for monitoring all four wheels and the brake system.

How do you turn off the brake light on a Chevy Silverado?

The only way to turn the brake light off is to restore proper line pressure to both brake circuits when the pedal is pushed. If your Silverado is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic.

Can a front wheel drive car use anti lock brakes?

In today’s world, you can feel confident driving home through several inches of fresh snow after a sumptuous holiday dinner. Your front-wheel drive car has excellent season-appropriate tires and an anti-lock braking system —commonly referred to as ABS.

Why does the emergency brake light stay on in my Chevy C1500 pickup?

Why Does the Emergency Brake Light Stay on in My Chevy C1500 Pickup? Vincent Ciulla is a certified master automotive technician who has diagnosed and repaired light trucks, domestic and foreign cars, and diesel engines, for more than three decades.

Why is my brake light not working on my car?

The problem most likely lies in the car’s central computer or ABS sensor, but it can also be from something else in the brake or electrical system. Disconnect the positive cable from the car battery, and then hold down on the brake pedal to drain the car’s electrical system.

What happens if you have a brake leak in a Chevy Silverado?

The leak can get worse over time and lead to brake failure. Your brake system is divided into two circuits. These circuits cut the brake system in two. That way, if the brake system gets a leak or fails, you still have brakes on half of your Silverado’s wheels.

Why does my Audi A4 have a brake warning light?

It is different than the anti-lock brake system, which gets its own ABS warning light. The brake light indicates that there is a problem with the physical braking system itself. If you are reading this article trying to figure out whether you should drive your vehicle, check the emergency brake first.

What causes a brake warning light to illuminate?

A brake warning indicator can illuminate for multiple reasons including: 1 A burnt out brake light 2 Anti-lock brake (ABS) sensor malfunction 3 Brake pads low on material 4 Low battery voltage 5 Low brake fluid in the reservoir 6 Parking brake stuck on

When does the ABS warning light come on?

Anytime a problem occurs in the ABS brake system the warning light gets on. In fact, ABS light stays on unless you fix the core issue. Basically, the warning light alerts the driver that the safety system is no longer active.

Why does my car have an ABS warning light?

This is to alert the driver that this safety system is no longer active and has been disabled. Let’s jump right in. The anti-lock brake system (ABS) helps to maintain control and directional stability of an automobile in case of extreme braking circumstances.

What does it mean when your brake system light is on?

The brake system light indicates a much bigger issue with your braking system — a problem which may limit your ability to brake the vehicle at all. Therefore, you would need your vehicle towed to the mechanic if you notice both lights on.

Where is the transmission on a Jaguar XJ6?

Transmissions are a four-speed automatic equipped with a lock-up torque converter. The transmission is mounted to the back of the engine, and power is transmitted to the fully independent rear axle through a two-piece propshaft.

Which is standard equipment on a Jaguar XJ6?

Power-assisted Anti-lock Brake Systems (ABS) with four-wheel disc brakes are standard equipment on all Jaguar XJ6 models covered in this manual. Power rack-and-pinion steering is also standard equipment. Your Jaguar manual The aim of this manual is to help you get the best value from your vehicle. It can do so in several ways.

What is the purpose of a Jaguar manual?

Your Jaguar manual The aim of this manual is to help you get the best value from your vehicle. It can do so in several ways. It can help you decide what work must be done (even should you choose to get it done by a garage).

How much does it cost to fix ABS light on Jaguar?

Check EBay and found BBA-REMAN selling they repair services. Place starting bid $35.00 on Jaguar ABS module and won. Free shipping and life time warranty. Just received back and after installation all ABS and brake lights disappear. No more traction control, stability control fail messages on the clock.

What should I do about my Jaguar XK8 ABS?

I have 1999 Jaguar XK8. Had same problem with ABS, traction and stability control. Check EBay and found BBA-REMAN selling they repair services. Place starting bid $35.00 on Jaguar ABS module and won. Free shipping and life time warranty.

Where is the anti lock warning light located?

An anti lock warning light will be in different places in the instrument cluster for each car, and it maybe accompanied by a red warning light. The abs system is like any other electrical system and is protected by a fuse that can blow if an electrical surge occurs or if the fuse ages.

The ABS does a self-test every time you turn on the ignition. Once you start your vehicle, the warning light will briefly come on, and if the computer finds a problem, the light will stay on.

What to do when your abs light goes off?

Check your E-brake to be sure that it is in the proper down position. Adjust a few times and see if the light goes off. During your ABS brake light inspection, you will want to check the levels in your brake reservoir to see if it has lost a substantial amount of brake fluid.

How do you turn off Check Engine light?

Most cars use this trick. Open the driver door and leave it open. Press and hold the brake pedal. Press and hold the odometer button. Insert the key and just turn long enough for the inside lights to turn on, but not try to start the car. Hold this position for about 20–30s, and then the check engine light should turn off.

What to do when your oil soon light comes on?

Press and hold the odometer button. Insert the key and just turn long enough for the inside lights to turn on, but not try to start the car. Hold this position for about 20–30s, and then the check engine light should turn off. Now you can release everything, shut the door and start the car.

How to diagnose service engine light for free?

Check engine light on? Here is how to use an OBD-II scanner for free to diagnose the service engine light & save money vs a mechanic fee. Menu Home About About Contact Categories Investing Banks CDs Dividends ETFs Finance Guru Commentary Index Funds Inflation Market Terminology Mutual Funds Stocks Wall Street News Lifestyle Finance Biking Donating

Why is my locker blinking in my Jeep?

It is likely a sensor but there are a number of things which can cause the symptom. And, one of the lockers may just not be unlocking due to failure—but the sensors or activator are more likely. It should be handled through warranty (I assume) so let them get it done for you. As for using the locker.

How does the rear locker work on a jeep?

As for using the locker. Your lockers only work in 4-LOW and at 10mph or less. The lockers do not work in 4 HI at all. If, when in 4LOW, you push the down (activate) button once you lock the rear axle…push it again you lock the front axle. If, when you have the front and rear locked you push down again, it will unlock the front.

Why is the rear diff lock light blinking yellow?

I have a 2012 PW and I spent the day off roading, some of which was in 4 low. while driving home I noticed the rear diff lock light was blinking yellow even though it was in the unlock position. I ended up pulling over and shifting into 4 low, driving it a few yards and then trying to lock the rear diffs.

Why does the red light keep blinking on the dashboard?

I locked my car doors with remote lock and a red light kept blinking on the dashboard. I waited to see if it would go out but it didn’t. I had to leave car unlocked for the light to stop blinking.

Why does the engagement light stop flashing on my Dodge Ram?

During this time of winter we normally have plenty of both snow and mud on several parts of our home’s rural acreage. It may take several seconds though while the truck is in motion on some of our quite extremely steep terrain, but the engagement light will always stop flashing.

Can a car drive without an anti lock braking system?

Some manufacturers combine the TEXT BRAKE indicator when a problem arises. The vehicle can be driven, but at your own risk. The brakes will function as normal, without the benefit of the anti-lock system. This means that in slippery conditions, the driver must control any tendency for the wheels to lock during braking.

What does it mean when your abs light comes on?

Most commonly, this light is triggered by low brake fluid or an engaged parking brake. However on some vehicles, it can simply indicate a problem elsewhere in the system and can be illuminated immediately if there is an ABS fault.

How do you reset the brake warning light?

You can reset the brake wear warning as follows: Put the key in the ignition and turn it all the way forward to the ignition position … but don’t start the engine. Leave it in this position for 2 minutes, or so, and then take the key out. Now, reinsert the key and the light should be gone.

How do I know if I have anti lock brakes?

Take note of the lights on the dash. If your vehicle is equipped with an ABS or anti-lock braking system, an alert light is going to illuminate every time you turn your key to the power or on position. This alert light will be yellow in color and will display the words “anti-lock” or “ABS” on the display of the alert light.

What causes the anti-lock light to turn on?

Wheel Speed Sensor The wheel speed sensors are responsible for monitoring the wheel speed and sending it back to the computer system.
ABS Module The antilock brake system runs through the ABS module.
ABS Fluid Level

What does a brake light warning light mean?

A brake warning light on the dash means that you either have an issue with the brake system or your emergency parking brake is on. In normal operation, the brake warning light will come on when you start the car, then the light will turn off immediately after you release the emergency parking brake.

What to do if your anti lock brakes are on the Fritz?

When your anti-lock brake system is on the fritz, here’s how to fix it. Going over the river and through the woods was more dangerous back when cars had crummy bias-ply tires, rear-wheel drive and less effective drum brakes.

When did cars start to have anti lock brakes?

ABS became required equipment on every new car in the United States in 2013, but automakers started to include it as standard equipment in the late 1980s. If you have a car built in the past couple decades, it probably has ABS.

What’s the warning light on my ABS brake?

If what you’re using has a coating on it, make sure you’ve got exposed metal at both ends. The ABS warning light will blink on and off in a pattern that corresponds to a trouble code or lack thereof. You’ll need a shop manual to decode these blinks.

Basically, the function of the anti-lock braking system is to keep your vehicle’s tires on the road as you aggressively step on the brake. That way, the wheels don’t lock up or skid uncontrollably on the road during the braking process. This is particularly important if the road is slippery or wet.

What does the ABS warning light mean on my car?

What the ABS light means. If the computer notices any abnormal signals, or the lack of a signal from any of the sensors, it will turn the ABS light on, to alert the driver of an issue. In addition to monitoring the wheel speed sensors, the computer can turn the ABS light on for other reasons like low brake fluid levels or a blown fuse.

Why is the warning light on on my car?

If it turns out that at least one of the wheels is moving too slowly, the anti-lock braking system will increase the pressure of the brake fluid to allow the wheel to move at a normal speed. But if there is a problem with the speed sensor, the anti-lock braking system will detect that and cause the warning light to illuminate on the dashboard.

What does the anti lock brake light mean on the dash?

The anti-lock Brake System (ABS) Light should come on in the dash when you start the car, but it should go out within a few seconds. If the light stays on, or comes on when you’re driving, it means that there is a problem with the ABS. If the anti-lock brake system has been disabled,…

What does the anti lock warning light mean?

When this warning light flashes or stays on steadily it means the system is disabled. So if you are in a situation where the car needs this safety system it will not work and you could lose control of the vehicle. An anti lock warning light will be in different places in the instrument cluster for each car,…

Modern vehicles have what is known as an anti-lock braking system. The purpose of this system is to keep the driver safe by preventing the wheels from locking up as you apply the brakes.

What the ABS light means. If the computer notices any abnormal signals, or the lack of a signal from any of the sensors, it will turn the ABS light on, to alert the driver of an issue. In addition to monitoring the wheel speed sensors, the computer can turn the ABS light on for other reasons like low brake fluid levels or a blown fuse.

Why does the anti lock braking fluid drop?

The braking fluid has a lot to do with controlling the braking pressure within an anti-lock braking system. There is a braking fluid reservoir which holds the fluid of the anti-lock braking system. Sometimes there could be a leak from this reservoir which will cause the fluid levels to drop.

When did Mercedes Benz stop making the 560sl?

That hefty sum was perfectly acceptable in the luxury market, and the 560SL sold so well that its average annual sales of 12,000+ units outpaced its predecessors despite the fact that Americans had seen this same basic shape of their roads for over a decade and a half. Nonetheless, Mercedes retired the W107/R107 chassis in 1990.

Why does the Check Engine light come on when the engine is idle?

The check engine light in your vehicle is designed to turn on if the Engine Control Unit (ECU) identifies an issues with how the engine is running. Look at your dashboard; if the check engine light is on in conjunction with idle issues, it may be because the idle control valve is malfunctioning.

Why is my idle control not working on my car?

If the idle has not changed at all, it’s likely because your idle control motor has not been functioning. If the idle control motor was working, disconnecting it should have created a difference in the engine’s idle. This test confirms there’s an issue with the idle control motor, but not what the issue may be.

How to get ABS, ESP / Bas, brake lights all came on?

When you have a chance, head over to the Newbie Section and say “Hi”. Tell us a little about yourself and your ride. That way we can welcome you all proper like. You will also get the ABS, ESP, BAS lights, as well as the E-brake light “on” if air has worked into the ABS pump. You may just need to bleed the brakes.

What does the ESP Bas light mean on a car?

The ESP BAS light is a warning light that indicates that there is a problem with your Electronic Stability Program and/or your Brake Assist Program. These systems are vital to the safety of your vehicle. Fixing them should be a top priority.

When you have a chance, head over to the Newbie Section and say “Hi”. Tell us a little about yourself and your ride. That way we can welcome you all proper like. You will also get the ABS, ESP, BAS lights, as well as the E-brake light “on” if air has worked into the ABS pump. You may just need to bleed the brakes.

What does it mean when your brake light comes on?

The “BRAKE” light has always meant one simple thing: There is a fault with the braking system. Most commonly, this light is triggered by low brake fluid or an engaged parking brake.

How is the ABS light different from the brake light?

The ABS light differs from the BRAKE light as it is usually controlled by a computer module. When this light is on, there are often trouble codes stored to help the owner or a technician diagnose the source of the fault in the anti-lock braking system. The BRAKE light on most vehicles is activated by…

What causes ABS light, emergency brake light and traction control light to come on?

Several crucial warnings have come on like ABS light, emergency brake light as well as traction control light. The speedometer is unresponsive. What caused this to happen and how can I get it fixed?

When does the ABS and traction control light come on?

The ABS Light activates once your car’s computer detects this problem. If a fuse blows, the PCM picks up the signal and activates the ABS light, along with the Check Engine Light, to notify you that a problem has occurred.

Why does my car have an anti lock braking system?

Modern vehicles have what is known as an anti-lock braking system. The purpose of this system is to keep the driver safe by preventing the wheels from locking up as you apply the brakes. That way, you can keep control over the steering and your vehicle won’t skid as a result of the wheels locking up.

What does the ABS warning light on my car mean?

The ABS warning light means the anti-lock braking system isn’t working properly, and may not work if you need to stop your car quickly.

What to do if your anti lock brake light is not working?

Connect an OBD code reader to your car’s on-board diagnostics system to determine any other causes of the brake light. Look for codes related to the brakes that appear on the reader, indicating any parts on the brakes that need repair or replacement.

How does the anti lock braking system work?

One of the systems being monitored is the anti-lock braking system (ABS). The ABS monitors the wheels to make sure that they are all turning at approximately the same speed. The system can then use the brakes to keep the vehicle under control during slippery situations.

When do you turn off the ABS light?

After the broken ABS (Anti-lock Braking System) has been fixed and work properly again, the light will go off. How to turn off the ABS light is actually to get the Anti-lock Braking System fixed. 2. Can You Drive With An ABS Light On?

What causes the Mitsubishi ABS warning light to come on?

The most common problem that causes the ABS light or warning message to come on in a Mitsubishi vehicle is a defective ABS wheel speed sensor.

The most common problem that causes the ABS light or warning message to come on in a Mitsubishi vehicle is a defective ABS wheel speed sensor.

Why are there brake lights on my dashboard?

Some common brake lights that can show up on a dashboard include: This light is a warning that brake pads are getting too worn and should be replaced soon: If these lights go off and on repeated or when you turn, it can mean to check the brake fluid level in the master cylinder:

How does a brake pad warning light work?

They are a safety component that alerts you (through a brake pad warning light) when your pads are too worn. Basically, the sensor connects in the brake pad and comes in contact with the rotor when the minimum thickness of the pad has been reached. For more about sensor wires and how they work with your brake system, check out this video:

It is different than the anti-lock brake system, which gets its own ABS warning light. The brake light indicates that there is a problem with the physical braking system itself. If you are reading this article trying to figure out whether you should drive your vehicle, check the emergency brake first.

Some common brake lights that can show up on a dashboard include: This light is a warning that brake pads are getting too worn and should be replaced soon: If these lights go off and on repeated or when you turn, it can mean to check the brake fluid level in the master cylinder:

They are a safety component that alerts you (through a brake pad warning light) when your pads are too worn. Basically, the sensor connects in the brake pad and comes in contact with the rotor when the minimum thickness of the pad has been reached. For more about sensor wires and how they work with your brake system, check out this video:

What are the warning lights on a Nissan?

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Nissan. Click a link to learn more about each one.

How to troubleshoot a Nissan with no brake lights?

If no lights illuminate at all, the issue is with the fuse. Turn the vehicle off and replace the brake light circuit’s fuse. Nissan automobiles have two fuse boxes. One is located in the engine compartment and one in the passenger compartment. Open the hood and remove the engine compartment fuse box cover by pushing the tab and lifting it up.

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Nissan. Click a link to learn more about each one.

How does service anti lock brake system work?

This morning while driving the truck went over a bridge expander bump and now I am getting two errors: 1) Service anti-lock braking system with the ABS light on; 2) Service electronic brake system with the traction control light lit. The lights and notice come on then go off for a few minutes then back on again.

Why do the ABS and brake lights stay on?

One of the causes responsible for ABS light stays on is losing hydraulic pressure. When inspecting why your ABS warning light stays on, you need to inspect the levels in your brake reservoir to see whether it has lost a significant amount of brake fluid or not. Low levels of the brake fluid is a possible cause making the warning light stays on.

Why do anti lock brakes lock up?

Anti-lock brakes usually don’t lock up unless there’s a brake problem. Some of the brake issues that can cause ABS brakes to lock up include bad brake pads, calipers on disc brakes, cylinders on drum brakes or wheel bearings.

What does a brake warning light mean?

Why is my brake light flickering?

Re: Flickering brake warning light When the Temp goes down the brake fluid contracts and when the temp goes up your brake fluid expands. When it’s cold it will contract to the point of it making your brake light flicker, if you fluid is actualy that low I would check your front brakes they may need replacement soon.

Why does the brake warning light keep glowing?

Naturally, the first step is to consider the obvious reasons why that dashboard warning light keeps glowing. The most obvious culprit is the switch located immediately under the parking brake pedal. If this malfunctions, the warning light may glow even if the brake has been released.

How much does it cost to fix a brake warning light?

The cost of fixing a brake warning light can vary because the cause of the problem can be a minor problem such as adding brake fluid to the master cylinder $2.00 (US). Replacing the master cylinder can cost between $35.00 and $65.00 (US) if you are doing it yourself and up to $250.00 (US) if you are having it done at a repair garage.

When does service ABS / service traction control light come on?

Service ABS / Service Traction Control light came on ! I start up my car this morning. And after 28,000 COMPLETELY trouble free miles. My DIC starts flashing Service Active Handling / Traction Control.

When does the traction control light come on?

If there is a problem with the traction control system that hinders its ability to work effectively, the traction control light will remain illuminated indefinitely. If the traction control light does come on, it will usually do so while you’re accelerating.

How does the traction control system work in a car?

Most modern vehicles have a traction control system in them. This system keeps track of the vehicle’s steering performance and stability. If the vehicle were to lose its traction on the ground, the traction control system will detect this problem and then act accordingly to correct the issue.

What are anti lock brakes and how do they work?

Diagnosing and repairing anti-lock brake systems. What are anti-lock brakes and how do they work? Anti-lock brake systems (ABS) are designed to prevent your vehicle’s wheels from locking (and skidding) during emergency stops and other challenging conditions.

When does the anti lock brake light come on?

The ABS (Anti-lock Brake System) light should only come on when you turn your key to “On” as a way to check that the light works or when the ABS system is activated. It also stays on when there is an issue with the system.

When your anti-lock brake system is on the fritz, here’s how to fix it. Going over the river and through the woods was more dangerous back when cars had crummy bias-ply tires, rear-wheel drive and less effective drum brakes.

Can a brake warning light be used with ABS?

Unless there are other brake warning lights on along with the ABS, you will still have normal braking capabilities. The vehicle won’t be able to assist you in the event of skidding however, so take extra care when driving.

What does the warning light on the dashboard mean?

Insert the key in the key slot on the dashboard to start it. This light means you are leaving the lane withing turning on the blinker. It is a warning meant to make sure you are not falling asleep while driving. This light means there is a problem with the Lane Departure Warning system.

What does the master warning light on Toyota mean?

Master warning light A buzzer sounds and the warning light flashes to indicate that the master warning system has detected a malfunction. Seat belt reminder light Warns the driver and/or front passenger to fasten their seat belts.

In addition, there is a warning light on the dashboard which will illuminate if there is any sort of problem with the anti-lock braking system. This is a light that you need to take seriously because it is an early warning sign that your braking system needs to be inspected right away.

What should I do if my car locks up?

That way, you can keep control over the steering and your vehicle won’t skid as a result of the wheels locking up. In addition, there is a warning light on the dashboard which will illuminate if there is any sort of problem with the anti-lock braking system.

The ABS does a self-test every time you turn on the ignition. Once you start your vehicle, the warning light will briefly come on, and if the computer finds a problem, the light will stay on.

Is it safe to drive with the ABS light on?

Since the ABS helps with vehicle control and stopping distances, it is an important safety feature to maintain – you never know when you’ll need it. If both the ABS and brake system light come on at the same time, your vehicle is no longer safe to drive.

Why is my anti lock brake light still on?

If you know your car’s anti-lock brake system is in good condition and the light is still on, there are some steps you can take to reset the light. The problem most likely lies in the car’s central computer or ABS sensor, but it can also be from something else in the brake or electrical system.

The braking fluid has a lot to do with controlling the braking pressure within an anti-lock braking system. There is a braking fluid reservoir which holds the fluid of the anti-lock braking system. Sometimes there could be a leak from this reservoir which will cause the fluid levels to drop.

When does the brake warning light come on?

Once the brake fluid level drops to a certain level in the master cylinder, it will flash the brake warning light on to tell you that you need to have it refilled.

Why do I have a low brake pedal light?

First, make sure it’s really the ABS light and not the light that indicates an issue with your normal brakes. To rule that out, check out your regular braking system first. A low brake pedal or grinding noise could indicate that it’s time to replace your brake pads or rotors.

When does the steering lock warning light come on?

The steering lock indicator light should only come on when the ignition is in the off position and the lock is engaged. If you see it come on at any other time, you should have the car checked out by a qualified technician.

When does the warning light on my car turn on?

Indicator light usually accompanied by another warning light and indicates that one or more warning systems have been detected. Click Indicator light will turn on when a new message is stored in the information display.

What does a security alert light mean on a car?

Security Alert Indicator light will turn on momentarily if the ignition switch is locked and will need the proper transponder-equipped key to restart. If the light is visible when the vehicle is on, then it typically indicates a malfunction in the security system.

If it turns out that at least one of the wheels is moving too slowly, the anti-lock braking system will increase the pressure of the brake fluid to allow the wheel to move at a normal speed. But if there is a problem with the speed sensor, the anti-lock braking system will detect that and cause the warning light to illuminate on the dashboard.

Brake Warning Light Indicator light turns on when the handbrake is on. If it lit continuously, it means that hydraulic pressure has been lost in one side of the brake system or that the fluid level in the master cylinder is dangerously low (due to a leak somewhere in the brake system).

That way, you can keep control over the steering and your vehicle won’t skid as a result of the wheels locking up. In addition, there is a warning light on the dashboard which will illuminate if there is any sort of problem with the anti-lock braking system.

Navigation