When did the Hyundai Santa Fe battery go dead?

When did the Hyundai Santa Fe battery go dead?

2017 Santa FE. Battery went dead in May of 2019. Had road service jump. Went dead again in October. Dealership said nothing wrong, but next day said it was a bad battery and replaced. A month later the new battery went dead.

Why is the battery light on in my Santa Fe?

A bad alternator will usually make itself known when the engine is already running. If you see your Santa Fe’s battery light turns on while the engine is already running, that is a strong indication that the alternator is no longer providing enough wattage to power the various electrical systems and charge the battery at the same time.

What should battery voltage be on Hyundai Santa Fe?

Specifically, you’ll need to set it to 20V DC. With your Santa Fe turned off, you’ll connect the negative side of the meter to the negative battery post or wire. Touch the positive side of the voltmeter to the positive battery wire. With the engine off, you should get a reading somewhere between 12.0 volts and 12.6 volts.

When did the battery in my Hyundai Palisade go dead?

Paul-the battery in my 2021 Palisade went dead about 1-1/2 months after purchase, after trying to charge it at home, and then trying to jump it, I decided to have the warranty people come tow it. However the guy and I decided to try jumping it, but his was too low, so he called for another driver with a fully charged battery jumper.

Can you change the battery in a Hyundai Santa Fe?

Your Hyundai Santa Fe boasts a dependable ride, but with an old, worn-out battery, you could easily end up stranded on the side of the road. Take away this fear by swapping out your old battery with a new Hyundai Santa Fe battery from AutoZone. We have durable batteries to give your Hyundai the starting power it needs to last for the long haul.

Is the positive battery clamp on a Hyundai Sonata?

The positive battery connection clamp on my wife’s Hyundai Sonata was badly corroded and close to falling apart. I checked with our local Hyundai dealer and was told that the clamp I needed was not available as a seperate item. The rep told me I’d have to buy the entire wire harness which included the positive clamp for roughly $350.

What’s the operating temperature of a Hyundai Santa Fe?

Operating temperature range: -40°F [-40°C] to 176°F [80°C] Your Hyundai Santa Fe boasts a dependable ride, but with an old, worn-out battery, you could easily end up stranded on the side of the road. Take away this fear by swapping out your old battery with a new Hyundai Santa Fe battery from AutoZone.

Is the battery terminal removable on a Hyundai?

It is a legit 100% OEM part. I wish they were sold for older models. The Hyundai dealerships only sell this as part of a cable assembly even though the terminal is removable. I found the part number on Google then checked Amazon.

Is there a manual for the Hyundai Santa Fe?

Hyundai Santa FE PDF Workshop, Service and Repair manuals, Wiring Diagrams, Parts Catalogue, Fault codes free download!! Hyundai Santa Fe – mid-size crossover, created on the platform Hyundai Sonata.

When did the Hyundai Santa Fe come out?

Hyundai Santa Fe – mid-size crossover, created on the platform Hyundai Sonata. The car was named after the city in New Mexico. In 2001, this model was the first crossover Hyundai, released at the same time as the Ford Escape / Mazda Tribute and Pontiac Aztek.

What are the electrical problems in a Hyundai Santa Fe?

The piston seals in the abs modules’s hydraulic valve could leak brake fluid into the electronic control unit (euc) . An electrical short in the abs module could increase the risk of an engine compartment fire.

How often should you change the battery in a Hyundai Santa Fe?

The video above shows you how to replace the battery in your 2009 Hyundai Santa Fe. We recommend changing the battery in Hyundais every 4 years.

How to remove shift cable from Hyundai Santa Fe?

Remove the floor console. 2. Remove the air duct. 3. Disconnect the shift cable (A). 4. Remove the retainer (A) and nut (B). 5. Remove the nut (C) from the manual control lever. 6. Remove the cable (B) from the bracket (A) at transaxle assembly side. 7. Remove the shift cable by pulling it toward the interior. 1.

Is it possible to put a Hyundai Santa Fe into drive?

You said initially you could not get the shifter to move past Neutral and into Drive, but later you said the car would not shift into any gear until the shift lock release was pressed. Is this to say that with the shift lock release pressed you could put it into Drive normally?

Why does my Santa Fe shift from Park to drive?

Customerreply replied 8 years ago Initially it would not move from park into any gear. then the AAA depressed the shift lock release and was able to get it into neutral then drive. When it was in drive the vehicle moved fine, no issues. Then when I stopped at my house, and went to put it in park the shifter would not go into park.