What was the 2003 CRV VTEC failure error?
P1259 Vtec failure… 2003 CRV. P1259 Vtec failure error. Power cuts out around 3K RPM’s. Test and replaced VTEC Solenoid Valve and Pressure Switch. Remove, cleaned screens which were partially clogged, and tested VTC Oil Control Valve.
What kind of engine does a 2003 Honda CRV have?
Lets recap; I have a 2003 Honda CRV 4WD with I-VTEC 2.4L engine, 5 Speed Manual. Using https://www.1hondaparts.com/oem-parts/honda-valve-assembly-vtc-oil-control-15830pnc003/?c=Zz1lbmdpbmUmcz12dGMtb2lsLWNvbnRyb2wtdmFsdmUmaT1TOUEzRTEwMTBBJnI9NyZhPWhvbmRhJm89Y3Itdi01LWRvb3ImeT0yMDAzJnQ9ZXgtNHdkJmU9NS1zcGVlZC1tYW51YWw%3D
What was the 2003 CRV p1259 failure error?
2003 CRV. P1259 Vtec failure error. Power cuts out around 3K RPM’s. Test and replaced VTEC Solenoid Valve and Pressure Switch. Remove, cleaned screens which were partially clogged, and tested VTC Oil Control Valve. Appears to function fine.
Why does my car not maintain 3000 rpm?
When trying to run the Idle learn procedure, the vehicle will not maintain 3000 RPM. After about a minute @3000 RPM it will drop to 2500 RPM, then cycle between 2500 and 2800 RPM at about 1/2 second intervals. Is this consistent with a faulty VTC Oil Control Valve?
P1259 Vtec failure… 2003 CRV. P1259 Vtec failure error. Power cuts out around 3K RPM’s. Test and replaced VTEC Solenoid Valve and Pressure Switch. Remove, cleaned screens which were partially clogged, and tested VTC Oil Control Valve.
What causes a Honda CRV to stall out?
Here are some of the issues that cause the CR-V to stall out. Remember, a vehicle needs air, fuel, and spark to run. It needs them in the right quantities and intervals, or it won’t run right. Fuel issues are one of the most common reasons that a vehicle would stall out, that includes your Honda CR-V. Bad gas- can cause an engine to stall out.
What is the engine code on a 2003 Honda CRV?
2003 Honda CRV with a check engine light on and a bad hesitation at around 2700 RPM. It almost acts like a governer. The codes are: P1259 Manufacturer control fuel air metering.
2003 CRV. P1259 Vtec failure error. Power cuts out around 3K RPM’s. Test and replaced VTEC Solenoid Valve and Pressure Switch. Remove, cleaned screens which were partially clogged, and tested VTC Oil Control Valve. Appears to function fine.