What type of oil does a Mercedes 300e take?
5W-30 Pento High Performance is a fully synthetic high performance engine oil, developed for the most recent vehicles with extended oil service intervals. Pento HP can be used in all gasoline and diesel engines containing turbochargers as well as non-turbocharged vehicles requiring 5W-30.
What oil should I use for my Mercedes Benz?
Castrol Syntec 10W-40. Quaker State Full Synthetic European Formula 5w-40. Pennzoil Synthetic European 5w-40. 76 Pure Synthetic Motor Oil 5w-40.
What oil does a Kia Sedona take?
SAE 5W-30
Engine Oil
Viscosity: | 10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
---|---|
Capacity: | 6 quarts (with filter)After refill check oil level. |
Torque: | 25-32 ft/lbs (Oil Drain Plug) |
What kind of oil does a Harley Davidson use?
Fully Synthetic. This is the best quality oil Harley engine oil. 100% synthetic 4-Stroke lubricant with Ester technology. Engineered for 2 cylinder engines and meets Harley Davidson spec. Meets JASO MA2 specifications for optimal wet clutch performance and suitable for catalytic converters.
Can you use synthetic oil on a Briggs and Stratton engine?
Synthetic oils are an acceptable oil at all temperatures. Use of synthetic oil does not alter required oil change intervals. Purchase the right oil for your engine at shop.briggsandstratton.com. *Below 40°F (4°C) the use of SAE 30 will result in hard starting.
What kind of oil does a Briggs and Stratton pressure washer use?
Briggs & Stratton SAE 30. 15 oz. of oil is required for the 2200 PSI Pressure Washer engine. Consult your engine operator’s manual for information specific to your engine. Proper care and maintenance of your equipment is proven to be the key to long engine life. Prior to each engine start, always check the oil dipstick for proper oil level.
What kind of oil is in semi synthetic oil?
Semi-synthetic oils are a blend of mineral and synthetic oils. They have definite improvements over pure mineral oils. Semi-synthetics can contain “hydrocracked” bases.