What type of oil does a 2005 PT Cruiser take?
The manufacturer of the 2005 Chrysler PT Cruiser specifies the type of oil as SAE 5w-30, but You can also use SAE 0w-30. One thing to note, however, is that You can’t mix it and the engine should be drained before using another form of oil.
What kind of oil goes in a 2005 PT Cruiser?
The manufacturer of the 2005 Chrysler PT Cruiser specifies the type of oil as SAE 5w-30, but You can also use SAE 0w-30.
How do you clean an oil pan drain plug?
Clean the drain plug opening thoroughly with brake cleaner or acetone and let the car sit in that position until the oil pan drain opening is perfectly dry Mix the JB Weld. Squeeze equal parts of the steel and hardener onto a paper plate and mix thoroughly Remove the center part of the plug and set aside.
How do you unplug an oil pressure switch?
To do this, place a large basin under the oil pan and open the drain plug with a wrench. Then, using an oil filter wrench, loosen the oil filter before removing it by hand. You’ll now be able to get to the oil pressure switch. You’ll see that a connect cable goes to the oil pressure switch that you need to unplug.
What kind of drain plug does Dodge Intrepid use?
An auto mechanic friend suggested a Self Threading Oil Pan Drain Plug. We discovered that the Dodge Intrepid does not have a standard oil pan plug size. Even knowing the year, make, and model does not clear that up. So, we bought a few different sizes of the self tapping metal plugs. It took a little experimentation to find the right size.
What causes an oil drain plug to get stuck?
Possible Reasons to Stuck Oil Drain Plug The main reason why an oil drain plug gets stuck is due to sludge. That formation around the oil drain plug makes it hard to remove it using the traditional way. The sludge forms around the drain plug because the oil in the engine has exceeded its oil change time.
How do you get an oil drain plug off a pan?
A gator grip has little teeth that will help you take off the drain plug from the oil pan. Just wrap it around the oil drain plug and turn counter clockwise. Pick up a gator grip with a self-adjusting socket here.
What’s the oil level on a Chrysler PT Cruiser?
The oil level in the engine block is a tad above the full line, so there’s plenty of oil in the engine, but is was also doing this when the oil level was a little above the ’empty’ line on the dipstick.
Why does my oil drain plug keep getting stuck?
In order to change the oil, you need to first drain the old oil and to do that, you have to take off the oil drain plug. But sometimes an oil drain plug becomes stuck because the oil has not been changed in a very long time or sometimes it is simply because someone over tightened it…
How can I get the oil plug out of my car?
Spray penetrating oil on the oil plug and leave it to sit for several hours. Take out a hammer, get under your car, and tap it with the hammer. Make sure you tap it going in the proper direction which is counter clockwise.