What tools do I need to change my rear brakes?
Tools Required
- Disposable mechanic’s gloves to protect your hands and keep them clean.
- Jack and jack stands.
- Lug wrench.
- C-clamp or length of wood to retract the piston.
- Wrench (choose a socket, open end or adjustable wrench)
- Turkey baster for drawing out brake fluid.
- Plastic tie, bungee cord or piece of string.
How much are rotors for a 2003 Chevy Silverado?
2003 Chevrolet Silverado 1500 Brake Rotor – from $57.99+ | AutoZone.com.
What tools are needed to change brakes and rotors?
What Tools Do You Need To Change Brake Pads and Rotors?
- Ratchet and Socket Kit. To fix your vehicle, you must have a socket set.
- Torque Wrench. A torque wrench is a must.
- Brake Pad Spreader or C-Clamp.
- Torx / Allen Set.
- Brake Bleeder Wrench.
- Jack and Jack stands.
- Lug Nut Wrench.
- Gloves.
What is the difference between fixed and floating calipers?
A fixed caliper is secured rigidly to the axle assembly and has at least two opposing pistons that force the pads against the disc. A sliding or floating caliper has pistons on only one side of the disc.
What kind of brakes do Chevy Silverado 1500 use?
The Chevy Silverado 1500 uses both brake pads and shoes on the rear wheels. The shoes are much larger than the ones used on other vehicles. Make sure you get the correct type of pads for your model. The rear brakes use a type of horseshoe-style single brake shoe on each wheel…
What do I need to replace my rear brake?
The items you’ll need are new brake pad and rotor kit from 1AAuto.com; 12, 18, and 22 mm socket and ratchet with a piece of pipe for extra leverage; flat blade screwdriver; large C-clamp; torque wrench; brake grease; brake cleaner; and jack and jack stands. Start off by loosening up these lug nut covers and we’ll fast forward as Don does this.
What’s the best way to remove a brake caliper?
Remove the lower bolt for the brake caliper with a flare-nut wrench, holding the slide pin in place with an open ended wrench. Pivot the caliper upwards.
How do you remove a brake shoe from a car?
Pull the disc off the wheel and hub. Unbolt and remove the single clip holding the brake shoe in place at the bottom using a small wrench. Slide the brake shoe off the actuator, then lift, bend and work it around and over the axle flange to remove it.