What tool is used to remove plastic rivets?
ABN Push Pin Pliers – 30 Degree Plastic Fastener Remover Tool, Snap Rings and Body Clip Removal Tool, Rivet Puller.
What is a clip puller?
Product Overview. Lisle LIS42480 are panel clip remover pliers. It helps to remove door clips. The tapered ends slide under the clip and grip its sides preventing damage. The tips are at a 90° angle providing easier access to tight spots and easier clip removal.
How do you remove rivets without tools?
For smaller rivets, use a drill bit to drive through the surface. For stubborn rivets that you can’t drill through, grind off the head of the rivet, then bore through it. You could also use a hammer and chisel to break off the head of the rivet and drive it through the surface if you don’t have a drill.
What are pry tools?
It includes two nylon spudgers, two nylon pry bars, a vinyl long board screen separation tool, PRYTECH PRO, steel spatula/scraper tool and straight tip ESD tweezers. Nylon is a non-abrasive, yet durable material. It makes the tools effective at prying open electronics cases without scratching or marring their surface.
What can I use to pry open a laptop?
Simply cut an old credit or membership card in half at about a 45 degree angle (as pictured above) and you have a great way of prying open a device without marring up the plastic. A commenter on Make also suggests using a guitar pick to perform the same task.
How do you use a rivet removal tool?
Simply attach rivet remover to a drill (not included), slide one guide and drill bit into tool, adjust drill depth to remove only the rivet head and drill away. Tool accepts cobalt and HSS threaded bits. Set includes guides and drill bits to remove many 1/8″, 5/32″ and 3/16″ rivets.
What kind of tool can I use to remove plastic fasteners?
This tool quickly removes various types of plastic fasteners that hold on weather stripping, radiator shrouds, fender linings, air dams and other plastic or rubber parts. The tool is equipped with a sliding urethane button for use when extra leverage is necessary. Patented Rubber Button Protects Paint.
What kind of tool do I need to remove shower trim?
You will need them in order to put your trim back together. You may need the following tools to remove your trim: 3/32” hex wrench, Phillips screwdriver, and a flat-blade screwdriver. Once you have removed your valve trim, the documents listed below are available to help you identify your shower valve.
What’s the best way to remove wheel nut covers?
There is a special tool to get them off, it’s usually with the locking wheel nut socket. Looks like this, http://www.eliseparts.com/products/show/76/496/whe… just push over the plastic nut until it clicks. The plastic tools are crap – bin it. Easiest way is to use a socket – push it on, pull it off. Job’s a carrot
How do you remove plastic from a nozzle?
The insulation layer is held in place with the above plastic clips. This tool removed the clips with ease. Just slide the “V” tip of the tool under the plastic retaining clips and rock upward. The clips popped right out with very little effort. That allowed access to the nozzle.