What to do when your Silverado is stuck in 4WD Low?
When it was stuck in 4 low I would take out the fuse ( on left side of dash) for the four wheel drive and wait for a minute or so and it would reset itself. Had the switch replaced but that was not the problem. Took it to the dealer and it turned out to be an actuator. I dont remember but think it was close to 300 bucks to have them fix it.
How often should I switch my Silverado to 4WD?
It might be too low or bad. Lubrication is especially important if you won’t be switching your Silverado 1500 into 4DW on a regular basis. To avoid having your 4WD selector light come on and go off at random, it’s recommended that you switch your vehicle into 4WD at least once a month and properly maintain your transfer case fluid.
Why is my Tahoe stuck in 4 low?
I had this problem about a year ago with my 06 Tahoe. When it was stuck in 4 low I would take out the fuse ( on left side of dash) for the four wheel drive and wait for a minute or so and it would reset itself. Had the switch replaced but that was not the problem. Took it to the dealer and it turned out to be an actuator.
Why is the serives light not working on my Silverado?
The switch panal lights for the 4×4 will not come on. Not a problem because I was in 2H. I had recenetly replaced the battery and the service light went out. I was not able to switch into 4H but was able to switch to 4Low. Upon doing this, the serives light came back on.
When it was stuck in 4 low I would take out the fuse ( on left side of dash) for the four wheel drive and wait for a minute or so and it would reset itself. Had the switch replaced but that was not the problem. Took it to the dealer and it turned out to be an actuator. I dont remember but think it was close to 300 bucks to have them fix it.
What happens when you switch from 2WD to 4WD on a Chevy Silverado?
If you don’t, certain vehicles will remain in 4wd regardless of the switch position and you’ll get the Service 4WD message in the info cluster until the code is cleared by the dealer. You can use and switch to any drive mode while underway, but just don’t forget to turn it back to 2wd before turning off the ingnition.
Can a GM Truck be stuck in 4WD?
From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. I have been involved in a similar thread ( http://www.gm-trucks.com/forums/index.php?…rt=#entry815696) with a similar problem.
What to do when your transfer case gets stuck in 4WD?
The service tech looked it up and found a bulletin that says this is a cold weather issue. In order to make sure your transfer case doesn’t get stuck in 4wd like mine did, the bulletin says to always turn the transfer case switch back to 2wd and wait for the “Shift In Progress” message to disappear before turning off the ignition.