What to do if your Mazda 626 has a leak?
Check all the vacuum lines, and make sure they are in good shape and connected properly. Check the PCV hose and lines also. In addition, check the large air intake hose from the Air Flow Meter to the intake manifold for cracks and leaks. They often crack in the valleys and are hard to spot.
What kind of power does a Mazda 626 have?
It has an output of 113.5 bhp (115 PS/85 kW) of power at 6000 rpm, and maximum torque of 170 N·m (125 lb·ft/17.3 kgm) at 4500 rpm. Power is delivered to the wheels via a 5 speed manual gearbox.
Why does my Mazda 626 idle so rough?
The problem began about a month and a half ago when it started getting colder, I live in the East coast. In the mornings, when I initially turn on the car to warm it up, it doesn’t feel as bad. Once the car is warmed up though it begins to idle and feel very rough.
Are there any transmission problems with the Mazda 626?
Mazda vehicles were notorious for automatic transmission problems in the early 2000s, especially the 626, Millenia, and MPV models. From 2005 to 2020, Mazda automatic transmissions in Mazda 3, 5, 6, CX-7, CX-9 have been very reliable with very few transmission issues. That doesn’t mean that Mazda transmissions never fail.
What are the causes of overheating in a Mazda 626?
What Are the Causes of Overheating in a Mazda 626? Mazda is a Japanese car company that has traditionally struggled in US markets. The 626 was first released in 1979 with the goal of capitalizing on Honda and Toyota’s market share with the Accord and the Celica, respectively.
Check all the vacuum lines, and make sure they are in good shape and connected properly. Check the PCV hose and lines also. In addition, check the large air intake hose from the Air Flow Meter to the intake manifold for cracks and leaks. They often crack in the valleys and are hard to spot.
What’s the problem with my 1993 Mazda 626?
This letter came in and tells the story very well: I am currently having some car trouble with my 1993 Mazda 626. The car is idling very rough, as if not enough gas is reaching the motor because it feels as though it wants to turn off. I constantly have to keep giving it gas.
What kind of transmission does a Mazda 626 have?
I have a 2002 Mazda 626 been driving it a year the car runs great,but the other day the car started jerking felt like the transmission.The Overdrive light comes on evevery time it jerks could someone please help me.
What causes the head gasket on a Mazda 626 to go bad?
It not only maintains the pressure of each cylinder’s combustion, it also maintains pressure for the engine’s oil and coolant systems as they circulate through the head. If the gasket is bad, the 626 can easily overheat. Conversely, an overheating engine can also cause the head gasket to go bad.
How do you find the trouble code on a Mazda?
Step 4 – The check engine light will start to blink, count the number, this will be the first number of the two digit trouble code. For example, if the light blinks two times and then pauses, the first number of the code is 2.
When did the Mazda 626 come out in Japan?
Sold in the Japanese domestic market under the Capella name, the vehicle was also commonly known in other major markets as the Mazda 626. The first Capella was introduced in 1970 and lasted until 1978. The second generation rear-wheel drive Capella was available between October 1978 and 1982, in both sedan and coupé forms.
How long does it take to fix Mazda p0421 code?
If the P0421 code is combined with other codes, try fixing the other codes first. The cost to diagnose the P0421 MAZDA code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
What does the fault code P1401 stand for?
We recommend Torque Pro. OBD II fault code P1401 is a manufacturer specific code that is defined by carmakers Ford, Lincoln, Mazda, and Mercury as “DPFE Circuit High Input”, or sometimes as “Differential [aka Delta] Pressure Feedback EGR (DPFE) sensor circuit high voltage detected”.
Step 4 – The check engine light will start to blink, count the number, this will be the first number of the two digit trouble code. For example, if the light blinks two times and then pauses, the first number of the code is 2.
What causes P1401 on a dpfe sensor?
Typical causes of P1401 are much the same across all applications, and these could include the following-. Defective DPFE sensor. (By far the most likely cause) Defective EGR valve. Defective EVR. Damaged, burnt, shorted, disconnected, or corroded wiring and/or connectors.
What happens when your throttle position sensor fails?
Your car bucks or jerks violently. TPS units sometimes fail in a way that causes the voltage signal sent back to the engine’s computer to be sporadic. This can feel like you are quickly applying and releasing the gas pedal. 4. Your engine surges and stalls out. A failing TPS can cause the engine to search for an idle or surge.
Where is the throttle body on a car?
Remove all of the hoses and electrical connectors that are attached to the top half of the intake manifold and the throttle body. If you are standing in front of the car facing the engine, the manifold/throttle body will be on the left side of the engine. Also, detach the air intake piece that is connected to the throttle body.