What to do if your fuel pump relay is short?
If you detect zero ohms or any resistance value instead of infinity, your fuel pump relay has shorted power pins and needs to be replaced. Set your digital multimeter to ‘continuity’. Connect one lead to one of the power circuit pins, and connect the other lead to the other power terminal.
Is the fuel pump relay controlled by the PCM?
Consequently, the fuel pump relay is usually controlled by, the ignition or powertrain control module (PCM). As a result, when switched on, the fuel pump relay; will provide current to the fuel pump, so that it may function. Therefore, any faults with it, can cause fuel pump issues.
What are the symptoms of a bad fuel pump?
The engine may still crank when the key is turned, however it will not be able to start due to lack of fuel. This symptom can also be caused by a wide variety of other issues, so having the vehicle properly diagnosed is highly recommended. 3. No noise from the fuel pump
Where is the fuse on a fuel pump?
It is often found in the fuse box located in the engine bay and functions as the primary electronic switch that controls power to the fuel pump. The fuel pump relay is usually controlled by the ignition or powertrain control module, and when switched on, will provide current to the fuel pump so that it may function.
What happens if the fuel pump does not work?
Without a working relay, the pump cannot inject the necessary fuel to complete the ignition process. Note that you may still hear the engine making noise when you try to start your vehicle even if the relay does not work. Other parts of your car’s engine might be in working order, but they won’t have fuel. 2. The Engine Starts and Stalls
What causes the coil on a relay to short out?
This uses a late-breaking normally closed contact wired across a series resistor. When the relay or contactor is de-energised, the resistor is shorted out. When the relay is energised and the armature closed, the resistor is now in series with the coil so reducing coil current and heat dissipation.
What are the symptoms of a bad ECM power relay?
A bad relay may cause the vehicle to crank, but not start, or sometimes not even crank at all. 3. Battery drain or dead battery. A failed ECM power relay can also cause a battery drain or dead battery. If the relay shorts it can leave power on to the computer, even when the vehicle is turned off.
What happens when a fuel pump relay goes bad?
If the fuel pump relay has an issue while the vehicle is operating it will cut off power to the fuel pump, which will cause the engine to stall. A faulty relay may allow the vehicle to be restarted a short while later, while a completely failed relay will not.
Where do you find the fuel pump relay?
When you shut off the ignition, it powers down the fuel pump. In most vehicles, the fuel pump relay can often be found in the fuse box in the engine bay, which is usually a long black box which contains fuel pump relay along with various other fuses and relays.
How much does it cost to replace a fuel pump relay?
You can easily find fuel pump relays online or at any automotive spare parts shop.The average replacement cost of the fuel pump relay ranges from $90 to $150, of which $20-$50 is for parts and the remaining is the labour cost.
How do you clean a fuel pump relay?
Since any debris will affect the fuel pump relay’s performance, you should regularly inspect and clean it when necessary. The fuel pump relay is an electrical car part, thus be extremely careful when handling a relay. First, take off the relay and use the blower to blow off dirt and dust for about 1-2 minutes.